One for All URC-6690 Restoring Keymoved Keys to Default Setting, Restoring a Single Keymoved Key

OFA Kam 6 Hybrid Owners Manual.fm Page 16 Wednesday, March 30, 2005 3:09 PM

OFA Kameleon™ 6-Device Hybrid Remote

RESTORING KEYMOVED KEYS TO DEFAULT SETTING

Restoring A Single Keymoved Key

1.Press a device (e.g. VCR/PVR) key that has a keymoved key.

2.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

3.Enter 9 9 4. The Inner IR Segments will blink twice.

4.Press the destination key twice (where the keymoved key is stored). The Inner IR Segments will blink twice.

Restoring All Keymoved Keys In A Single Mode

1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

2.Enter 9 9 4. The Inner IR Segments will blink twice.

3.Press the destination mode twice (where keymoved keys are stored). The Inner IR segments flash twice.

CHANGING VOLUME LOCK

The OFA Kameleon™ 6-Device Hybrid Remote (URC-6690) is set at the factory for independent volume control of each selected device. However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume in all other modes). After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.

LOCKING VOLUME CONTROL TO ONE MODE (GLOBAL VOLUME LOCK):

1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

2.Enter 9 9 3 and then press any mode key once (e.g., TV). The Inner IR Segments will blink twice.

Now, when you press VOL+, VOL-, or MUTE, the volume of the selected device (e.g., TV) will be controlled regardless of the mode you have selected.

UNLOCKING VOLUME CONTROL FOR A

SINGLE DEVICE (INDIVIDUAL VOLUME

UNLOCK):

1.Press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode.

2.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

3.Enter 9 9 3 and then press VOL- once. The Inner IR Segments will blink four times.

4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.

Now, after you select a device that has volume unlocked (e.g., AUD), pressing VOL+, VOL-, or MUTE, will control the device’s volume only in its own mode.

UNLOCKING ALL VOLUME CONTROL (RESTORING DEFAULT SETTING):

NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume

16 Changing Volume Lock