One for All URC-6690 owner manual Using Keymover

OFA Kam 6 Hybrid Owners Manual.fm Page 15 Wednesday, March 30, 2005 3:09 PM

assign the unused AUX key to operate the second DVD as follows:

1.On the remote control, press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

2.Enter 9 9 2. The Inner IR Segments will blink twice.

3.Press DVD once, then press AUX once.

The AUX key is now ready to be programmed for your second DVD. (See Programming Device Control on page 8.)

To re-assign other device keys to the AUX key, repeat steps 1 through 4 above by substituting the sequence from the chart:

To Re-Assign
Device Key…	Perform Sequence…
AUX as 2nd TV key:	SETÖ9Ö9Ö2ÖTV
	ÖAUX
AUX as 2nd	SETÖ9Ö9Ö2Ö
VCR/ PVR key:	VCR/PVRÖAUX
AUX as 2nd	SETÖ9Ö9Ö2Ö
CBL/SAT key:	CBL/SATÖAUX
AUX as 2nd AUD	SETÖ9Ö9Ö2Ö
key:	AUDÖAUX

You can also re-assign another unused device key by substituting an open key for the AUX key in the above chart and performing the sequence. For example, to re-assign an unused CBL/SAT key as a 2nd TV key, perform SETÖ9Ö9Ö2ÖTVÖ CBL/SAT. When a re-assignment is done, the Inner IR Segments will blink twice to confirm your choice. At that time, you will need to program the remote control for the new device (see Programming Device Control on page 8).

OWNER’S MANUAL

USING KEYMOVER

OFA Kameleon™ 6-Device Hybrid Remote (URC-6690) includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e., source mode) to another mode (i.e., destination mode).

NOTE: The following keys cannot be used as

a source or destination: TV, CBL/SAT, VCR/PVR, DVD, AUD, AUX, FAV, and SET.

PROGRAMMING KEYMOVER

For example, if your VCR does not have volume control, you can map the volume and mute keys from the TV mode to the VCR mode as follows:

1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

2.Enter 9 9 4. The Inner IR Segments will blink twice.

3.For the source mode, press TV once.

4.For the source key, press VOL+ once.

5.For the destination mode, press

VCR/PVR once.

6.For the destination key, press VOL + once.

IR Segments will blink twice indicating the keymoved sequence is correct.

7.Repeat steps 1 through 7 twice more, substituting VOL- and MUTE as source and destination keys in steps 4 and 6.

Upon completion of the above procedure, you can now use your OFA Kameleon™ 6- Device Hybrid Remote (URC-6690) to control the TV’s volume and mute in the VCR mode, as well as in the TV mode.

Using Keymover 15