One for All URC-6690 owner manual Using Macros, Programming a Master Power Macro

OFA Kam 6 Hybrid Owners Manual.fm Page 11 Wednesday, March 30, 2005 3:09 PM

5.Repeat step 4 three more times for remaining digits. Use 2 for the second digit, 3 for the third digit, and 4 for the fourth digit.

6.To check for codes of other devices, repeat steps 1 through 5, but substitute the appropriate device key for each device you are checking.

USING MACROS

With programming, the M1 and POWER keys on your OFA Kameleon™ 6-Device Hybrid Remote (URC-6690) can be setup to perform repetitive, time-consuming operations for easy, convenient access through the press of a single key. Macro keys are ideal for home theater operations, setting a favorite channel, guide steps, or other multiple functions you would like to control with one key press. Moreover, each macro key can hold up to 15 key presses total.

NOTE: Programming a new macro over an existing one will erase the original macro.

PROGRAMMING A FAVORITE CHANNEL

With so many channels available through your cable or satellite system provider, you can program a macro that directly selects a favorite channel with one key press. For example, let’s assume your favorite cable programs are on channel 52. Use the following instructions to program a macro key for direct access of this channel:

NOTE: This example assumes the TV is tuned to the correct Input to view your cable box.

1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

OWNER’S MANUAL

2.Enter 9 9 5. The Inner IR segments will blink twice.

3.Select an open macro key (e.g., M1) and press it once.

4.Press CBL once.

5.Enter the channel number, 5 2.

NOTE: If you have access to over 100 channels, enter 0 5 2. Also, if the original remote control required pressing Enter to change the channel, also press Enter after the channel number (e.g., 0 5 2 Enter).

NOTE: You can program up to 15 keypresses on each macro key.

6.Press and hold SET until the Inner IR segments blinks twice, then release SET.

Now when you press M1, you will instantly see cable channel 52 on your TV set.

PROGRAMMING A MASTER POWER MACRO

In its default state, the POWER key on the OFA Kameleon™ 6-Device Hybrid Remote (URC-6690) will individually power your home entertainment devices on or off.

However, you can also program a Master Power Macro onto the POWER key that will sequentially turn on or off all the devices with a single key press.

To program the Master Power Macro:

1.Press and hold SET until the two Inner IR segments flash twice. The current mode key will blink on and off during programming.

2.Enter 9 9 5. The Inner IR Animation will blink twice.

3.Press the POWER key once.

4.For the first device you want in the power-on sequence, press its device key (e.g., TV) once.

Using Macros 11