One for All URC10820N Changing Volume Lock, Locking Volume Control To One Mode Global Volume Lock

Page 9

4.Press the learning key (e.g., L1) to be deleted twice. The LED will blink twice after the second press.

5.To clear additional functions stored on other learning keys, repeat steps 1 through 4 (in this section).

Changing Volume Lock

This remote is set at the factory for independent volume control of each selected device.

However, you may change the Volume Lock setting to Global Volume Lock so that a device’s volume will be locked to one mode (e.g., to control TV volume in all other modes). After that, if desired, you can perform Individual Volume Unlock on a selected device to set its volume control for independent operation.

Locking Volume Control To One Mode (Global Volume Lock)

1.Press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 3 and then press any mode key once (e.g., TV). The LED will blink twice.

3.Now, when you press VOL +, VOL -, or MUTE, the volume of the selected device (e.g., TV) will be controlled regardless of the mode you have selected.

Unlocking Volume Control For A Single Device (Individual Volume Unlock)

1.After performing Global Volume Lock (see above), press a desired mode key where you want volume to be unlocked (e.g., AUD) and controlled within its own mode.

2.Press and hold SET until the LED (red light) blinks twice, then release SET.

3.Enter 9 9 3 and then press VOL - once. The LED will blink four times.

4.If desired, repeat steps 1 through 3 (of this section) for each device that you want volume to be unlocked.

5.Now, after you select a device that has volume unlocked (e.g., AUD), pressing VOL +, VOL -, or MUTE, will control the device’s volume only in its own mode.

Unlocking All Volume Control

(Restoring Default Setting)

NOTE: Performing these instructions will restore independent volume control for all programmed devices (e.g., TV volume control in TV mode, VCR volume in VCR mode, etc.).

1.On the remote control, press and hold SET until the LED (red light) blinks twice, then release SET.

2.Enter 9 9 3 and then press VOL + once. The LED will blink four times.

3.Volume will again be independently controlled according to its default states for all programmed devices.

Using Macros

You can program the M1 ~ M3 keys on your remote to perform repetitive, time-consuming operations for easy, convenient access through the press of a single key.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Contenido ContentsInstalling Batteries Features and FunctionsIntroduction Key Charts Device Controls These Devices KEY Device TableSetting Up Your Components AUX1 Code Programming Combo Device ControlAUX2 Code To control a TV/DVD ComboChecking the Codes Searching For Your CodeLearning Precautions Using LearningProgramming a Learning Key Deleting Functions From The Learning KeysChanging Volume Lock Locking Volume Control To One Mode Global Volume LockUnlocking All Volume Control Restoring Default Setting To Program the Master Power Macro Programming a Master Power MacroTo Operate Master Power Macro Programming a Favorite ChannelClearing a Macro Programming a Macro On a Device KeyTo Program the Device Key Macro To Operate the Device Key MacroUsing Channel Scan Programming Favorite Channel ScanRe-Assigning Device Keys Restoring Keymoved Keys To Default Settings Using KeymoverProgramming Keymover Restoring a Single Keymoved KeyRestoring Factory Default Settings TroubleshootingRestoring All Keymoved Keys in a Single Mode Care and Maintenance FCC ComplianceAdditional Information Limited Lifetime Warranty Introducción Instalación de las BateríasCaracterísticas y Funciones Funciones de las Teclas Tecla DE Controla Estos Dispositivos Tabla de DispositivosDVD, VCR, DVD/R, HTIB, DVD/VCR Programación de un Dispositivo AparatoPara controlar un aparato combinado TV/DVD Programación de un Aparato CombinadoVerificación de los Códigos Búsqueda de su CódigoUso de la Función Aprendizaje Precauciones sobre la Función AprendizajeProgramación de una Tecla de Aprendizaje Borrar Funciones de las Teclas de Aprendizaje Cambio del Bloqueo del VolumenProgramación de un Macro de Canal Favorito Uso de los MacrosProgramación de Un Macro en una Tecla de Dispositivo Para Programar el Macro de Tecla de DispositivoUso del Macro de Tecla de Dispositivo Programación de una Exploración de Canales Favoritos Uso de la Exploración de CanalesReasignación de las Teclas de Dispositivos Borrar un MacroProgramación de la Función Keymover Uso de la Función KeymoverLocalización de Fallas Restauración de los Valores Fijados en la FábricaRestauración de una Sola Tecla Mudada Restauración de Todas las Teclas Mudadas en un Solo ModoInformación Adicional Conformidad con la FCCGarantía Limitada durante la Vida Útil del Producto Cuidado y MantenimientoPage DTV Converters AudioRécepteurs TV numériques Convertidores DigitalesVCRs / Magnétoscopes DVD / Lecteurs DVDPVRs DVRs
Top Page Image Contents