ContentsIndex
94
CABLE REMOVAL AND REPLACEMENT
If you should need to remove or replace a Cintiq cable, follow the below procedure.
Remove a cable:
1.Turn off your computer and power off Cintiq. Disconnect all cables from between the pen display and your computer.
2.Remove Cintiq from the display stand. Place the pen display face down on a flat, soft surface (such as a cloth spread across a desktop).
3.Remove the bearing hub by unscrewing the four bearing hub attachment screws. Carefully separate the bearing halves and remove the bearing stopper to free up the cabling. For details, refer to the instructions found in using an alternate mount or stand.
4.Loosen the rear cover screws and lift the cover away from the pen display.
Connectors are
5. Remove the cable clip and unseat the cable.
Cable clip
Cable seats
6. If the cable you wish to remove has thumbscrews, loosen them. Disconnect and remove the cable.
ContentsIndex
94