FUNCTIONAL OVERVIEW
Back Panel
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
AC IN
9
ON
I
O
OFF
10 11 12
1ANTENNA IN / OUT - For Antenna or Cable TV connection. Passthrough connection to TV does not transfer the output signal from the DVD Recorder.
*Some units do not have a Passthrough connector. In this case, use the included splitter (See page 13).
2VIDEO INPUT 1 - Composite Video input for recording. To select this input, use the SOURCE button and choose VIDEO IN 1.
3
4COMPONENT/PROGRESSIVE SCAN VIDEO OUTPUT - Use this output with TVs supporting Component Video or Progressive Scan input for best video quality. Select this output in the DVD Recorder’s
SETUP MENU.
5STEREO AUDIO OUTPUT - Connect to TVs or other audio equipment supporting Stereo Audio in.
6COAXIAL DIGITAL AUDIO OUTPUT - Use a special coaxial digital audio connector to send the raw coded digital signal to devices supporting digital decoding.
7OPTICAL DIGITAL AUDIO OUTPUT - Use to connect to a receiver or other device with 5.1 channel decoders. This output is the coded digital signal.
8POWER CORD SOCKET - Plug the matching end of the power cord into the unit before connecting the other end to the wall socket.
9MAIN POWER SWITCH - The main power switch must be set to ON for the unit to function. Make sure all cable connections are complete before switching the main power switch to ON. When the main power switch is turned ON, the unit will enter Standby Mode, where it may be turned on with the remote control or the front power switch.
10STEREO AUDIO INPUTS - Use with
11
12COMPOSITE VIDEO OUTPUT - Standard Video Output supported by most TVs.
10