Powering on the unit

DVD PLAYER OPERATION

Only after all connections are complete, connect the power

cord and power on the unit.

		AC outlet
		100~230V

1		Plug the appropriate end of the power cord into the unit
		first, then plug the standard jack end into a wall socket
		or power strip.

2		Turn on the main power switch on the back of the unit.
		The unit is now in STANDBY MODE. Once this switch
		has been turned on, the unit will always be either ON, or
		in STANDBY MODE.

3		Press STANDBY on the remote control or front panel to
		bring the system out of standby mode. The system is
		now ready to use.
CH-DVR 1500 DVD PLAYER - RECORDER			PROGRESSIVE SCAN VIDEO
				DVD / TV LIVE		/
			RECORD
				SOURCE		//
			DOWN UP ENTER RETURN
	ON / STANDBY		S-VIDEO IN 2		L AUDIO R		VIDEO IN 2

ON / STANDBY

DISPLAY DIGEST BOOKMARK

HIDE

AUDIO SUBTITLE MUTE

Notes on power states

There are 3 power states for this unit:

ŸOFF - The main power switch is turned off. The unit draws no power and cannot be turned on by the remote control.

ŸSTANDBY - The main power switch has been turned ON, but the unit has not been taken out of standby by pressing either the STANDBY key on the remote control or the ON / STANDBY button on the front panel. The unit draws a slight amount of power to enable the remote control receiving circuit.

ŸON - The main power switch has been turned ON, and either the STANDBY button on the remote control or the ON / STANDBY button on the front panel has been pressed. The unit is ready to use.

Initial Setup Procedure

When the unit is first powered on, you'll be prompted to set the time and date as well as TV Tuner options. You can always change any of the settings you choose during the Initial Setup later in the DVD Recorder's SETUP MENU.

Using the Menus

CH+

ENTER

	CH-

1	Use the UP/DOWN keys to increase or decrease the
	value of a selected field or move to a field above or
	below. Use the LEFT/RIGHT keys to move to the
	previous or next fields.

2	Press ENTER to select an option and/or continue.

Setup Language

You may select English, Spanish or French as the language used by the Initial Setup Menus. When the player's on-screen Setup Menu is accessed later by pressing SETUP, this language will be used as well. Press the UP/DOWN keys to select a language, then press ENTER to confirm.

Choose English Menus

Choose Spanish Menus

Press <ENTER> to continue

Time and Date

Setting the Time and Date correctly is important, since Timer recordings depend on an accurate setting. The Time format used is 24HR. This means that 1:00PM will be represented as 13:00, 2:00PM as 14:00, and so on. Use the UP/DOWN keys to increase or decrease the Time or Date and the LEFT/RIGHT keys to move to a different field. When you're done, move to COMPLETED and press ENTER.

Please set the Time and Date

00:05:10

01/01/00

Completed

The Initial Setup is now complete. Remember, any settings chosen during the Initial Setup can be changed at any time in the DVD Recorder's SETUP MENU. Press ENTER to exit the Initial Setup and begin using your DVD Recorder.