CyberHome Entertainment CH-DVR 1500 manual Recording Over Existing Titles

Page 27

RECORDING

3 Use the UP/DOWN ARROW keys to select an Input Source, and press ENTER.

 

 

INPUT SOURCE

INPUT SOURCE

 

VIDEO IN 1

 

 

TV

 

 

S-VIDEO IN 1

TV

 

VIDEO IN 2

 

S-VIDEO IN 2

 

 

VIDEO IN 1

 

 

S-VIDEO IN 1

 

 

VIDEO IN 2

 

 

S-VIDEO IN 2

 

 

 

 

 

Recording

In Live Recording mode, you may record with no specific end point, or specify the length of the recording - in multiples of 30 minutes - using the REC button.

2

You may pause the DVD Recorder during a Live

 

 

Recording. Simply press PAUSE and the recording will

 

 

stop temporarily. Press PAUSE again to resume

 

 

recording.

 

 

 

 

3

To end recording, press STOP. Keep in mind that the

 

 

recording will end automatically if the disc runs out of

 

 

space. There will be a pause while the player updates

 

 

the disc contents.

 

 

4

To return to the Title Screen, press TITLE. You will see a

 

 

thumbnail image representing your last recording, with

information on the details of the recording, including the Date and Time the recording was made, along with the Length and Recording Mode.

DVD/TV LIVE SOURCE

TIMER

REC REC MODE

EDIT

PLAY

FRONT PANEL

OR

RECORD

FRONT PANEL

OR

DVD / TV LIVE

CH 44

8:00:00 PM, Jan 2, 2003

Length: 0:30:00 Quality: HQ

5% free

SOURCE

1 To begin recording, press the REC button. This will begin recording without a specific end time. Alternatively, you can set the end time of the recording by pressing REC multiple times to cycle through 30 minute intervals. The stop time options will be dependent on the amount of disc space available, as well as the record mode (quality) setting.

If you wish to An icon will appear on the screen letting you know that the recording has begun. The DVD Recorder's front display will show "REC", followed by the elapsed time of the recording.

+30

 

 

+60

. . .

 

REC

 

REC

!Recording Over Existing Titles

Normally, a live recording is made with the Recorder in TV LIVE mode and an Input Video Source (such as the TV Tuner or AV Input) being viewed. In this scenario, a new title is created for the recording and existing titles are preserved.

Alternatively, you can choose to OVERWRITE existing recordings on a disc. To do this, press the REC key while the Recorder is in DVD playback mode. The Recorder will switch to TV Live mode. Now, press REC again. Using this method, the playback location or title selection will determine where the recording will begin and which titles will be overwritten.

Overwriting from a Playback Point

During playback of a recording, press REC, then REC again to begin overwriting existing titles from that point. In FIGURE 1 shown below, the recorder is in playback mode. Once REC is pressed, the player switches to TV LIVE mode, as shown in FIGURE 2. In FIGURE 3, the remainder of the original title will be overwritten with a new title by pressing REC again. Existing titles will also be overwritten depending on the length of the recording.

1

2

3

REC

27

Image 27
Contents Video Safety Instructions Explanation of warning symbolsRead the following instructions carefully Contents Introduction DVD+R/RW RecorderProgressive Scan DVD Player Caring for Optical Discs Optical disc compatibilityMake sure the package contents are complete Functional Overview Remote ControlFront Panel Displays the number of the current Title on a DVD disc Front VFD DisplayBack Panel Setup MenuImportant note for older TV models Connecting the video output to your TVConnections Composite Video Typical connectionResetting the video output VideoComponent Video Antenna & TV Connections Audio Output ConnectionsConnecting Audio/Video recording sources to the A/V Inputs Back AV Inputs Video in 1, S-VIDEOFront AV Inputs Video in 2, S-VIDEO Setup Language Powering on the unitInitial Setup Procedure Using the MenusInserting a Disc Select the DVD Playback ModeUsing Disc Menus DVD Player OperationAbout the Screen Saver Basic Disc PlaybackRepeating a Disc, Chapter, Title or Track Advanced PlaybackSlow Motion Playback Jumping to a Specific Title, Chapter or TimeUsing the Zoom Function Repeating a Segment You DefineMulti-Angle Function Displaying Playback Information Muting the soundChanging the audio track SubtitlesViewing thumbnails of your JPG pictures Using the zoom function with JPGsViewing JPG Files Slide ShowsMP3 Player Playing MP3 FilesWhat you can Record From RecordingIntroduction to Recording Discs you can Record ToChecking the Time and Date Setting Recording OptionsSetting the Record Speed Setting the Auto Chapter OptionAdding and Deleting Channels TV Tuner SetupChoose Cable or Antenna Scanning for Available ChannelsAutomatically Adding Chapter Markers Title ScreenTypes of Recordings Making a Live RecordingRecording Over Existing Titles RecordingOverwriting from a Playback Point Selecting Titles to Overwrite Timer RecordingsDVD+R Discs must be Finalized Title LimitTo exit the Timer Menu, press Timer Timer Recording MessagesEditing Your Recordings Editing OverviewEdit Menu Functions Title Screen Edit Title Edit Menu Functions PlaybackChapter Markers Only are Added Chapter LimitChapter Markers Only are Removed Remove ChapterHide Chapter Use the Play Full Title Option Hiding Video Segments with the Hide ButtonShow Chapter Press Setup to enter the Setup Menu Erasing a DVD+RW DiscNew Picture DVD Recorder Setup Menu Using the Setup MenuLanguage Settings Audio Setup Options Video SetupSystem Setup Record Mode Options Timer RecordDisc Media Options DVD Player may not support DVD+R/RW discs TroubleshootingCommon Problems & Solutions If the disc is a DVD+R, make sure it has beenSpecifications Index