EverFocus EDR-1640, EDR-920 manual Camera Menu, Install / Covert

3.2 CAMERA MENU

CAMERA

CAMERA1	TITLE				CH1
CAMERA2	PTZ ID				01
CAMERA3	INSTALL/COVERT				ON/OFF
CAMERA4	SEQ (MAIN/CALL)				03/03 SECS
CAMERA5	REC QUALITY				HIGH
CAMERA6	REC SPEED ON TIME ZONE
CAMERA7
	TP	NORMAL		EVENT		SET
CAMERA8
	1	5	IPS	25	IPS	OFF
CAMERA9
	2	5	IPS	25	IPS	OFF
SUMMARY	3	5	IPS	25	IPS	OFF
	4	5	IPS	25	IPS	OFF
	5	5	IPS	25	IPS	OFF
	6	5	IPS	25	IPS	OFF
	7	5	IPS	25	IPS	OFF
	8	5	IPS	25	IPS	OFF
	N	5	IPS	25 IPS		OFF

Menu display for EDR-920, EDR1640 identical, but with 16 cameras.

The most important recording operation settings are defined in the CAMERA menu. Before changing the settings in this menu, recording has to be stopped.

Each camera is set individually:

(1)NAME: Enter the video channel description with max. 12 characters each. Available characters are (select with JOG):

0,1,2,3,4,5,6,7,8,9,

A,B,C,D,E,F,G,H,I,J,K,L,M,N,O,P,Q,R,S,T,U,V,W,X,Y,Z, ( ) . , + - / and space

(2)PTZ ID: Enter the RS-485 receiver address of a speed dome or telemetry receiver camera connected to this video channel.

(3)INSTALL / COVERT:

INSTALL (first position) All connected cameras have to be set to ON, all not connected cameras are set to OFF.

ATTENTION: The manual setting is compulsory, autodetection for connected cameras is not available!

COVERT (second position): A camera programmed COVERT “ON” will not be displayed, but recorded at defined parameters.

(4)SEQ(MAIN/CALL): Camera dwell time in sequence operation (automatic switching) for main (first position) and call (second position) monitor

ATTENTION: Some Pelco-D / -P protocol domes and receivers require an address offset of -1, i.e. the address assigned to the dome / receiver in the DVR camera menu must be 1 below the address set in the dome / receiver itself!

31