EverFocus EDR-920, EDR-1640 manual Playback Without Search Function, Fast forward / reverse

Page 59

5. PLAYBACK

5.1 PLAYBACK WITHOUT SEARCH FUNCTION

(1) Playback

PLAY

(2)STOP

STOP

Press the PLAY key to switch the DVR to playback mode. Depending on the “QuickPlay” function settings (see SYSTEM menu), playback starts at one of the following positions:

QuickPlay OFF: playback starts at the last playback position

QuickPlay ON: playback starts 5 ~ 60 min (definition in SYSTEM menu) before current recording position

Press the STOP key to stop the playback mode.

(3) Fast forward / reverse

Use the JOG/SHUTTLE to control the playback speed in playback mode.

PLAY

Turn the SHUTTLE clockwise for fast forward playback. Depending on the shuttle speed, the playback speed increases to 2, 4, 6, 8, 16 or 32x.

Turn the SHUTTLE counter-clockwise for normal or fast reverse playback. Depending on the shuttle speed, the playback speed increases to 2, 4, 6, 8, 16 or 32x.

Use the ENTER key to lock the fast playback search and the SHUTTLE or

PLAY key to unlock the fast playback search.

ATTENTION: HDD shutdown and removal is not admissable during recording and playback mode and upon DVR system startup!

ATTENTION: Switching off the harddisk with the key switch will logoff the harddisk from the system. Remove the harddisk only after the green power source LED at the harddisk tray is extinguished.

58

Image 59

Contents EDR-920 Safety warnings Safety warningsTable of Contents Playback RecordingDelivery Scope FeaturesIntroduction Video input Technical DataTitle generator Keys Front Panel Operating ElementsJog / Shuttle Page EDR1640 ConnectionsAudio output Audio output Video inputs EDR920Page Global types of event Screen DisplaysChannel-related types of event XX% Playback date Playback status Playback positionPause HDD fan message Delivery scope Video connection installation, DVR cascadingDVR cascading Audio Recording Functionality Audio connection installationGeneral RS-485 bus installation RS-485 keyboard installationPage EKB-500 connection with network patch cable 2 RS-485 plug connection assignmentEKB-500 connection to several DVRs Speed dome installation Descriptions Alarm input / output installationInstallation EDA800s harddisk expansion unit PS/2 mouse installationNetwork system requirements Network connectionDirect PC connection through crossover network cable Network connection through patch cableStart-up Power connectionHarddisks Setup Menu Date Time / Date MenuTime Central Europe daylight saving time adjustment Time Zone Time SynchronisationTime Server Camera Menu Install / CovertREC Speed on Time Zone Superior High Standard Basic LOW LowerCopy function SummaryTime Stamp POS Recording MenuRecord Audio Time StampRecord Mode ResolutionActive Camera Alarm MenuAlarm Alarm TypeSummary Sensitivity Alarm OutputMotion Detection MotionPage Area Setup Vloss Video Loss MenuNetwork Network MenuAlarm Network alarm Email Email alarm Password SET activation Timer MenuDAY CorrectHDD harddisk Menu 10 RS232/RS485 Menu FAN Failure Network AlarmStop Record HDD Temp5EMAIL No HDDHDD Full System Menu SAVE/LOAD ConfigurationSystem Password User rights, version Recording RecordingEvent recording Timer scheduled recordingFast forward / reverse PlaybackPlayback Without Search Function Single image playback Slow forward playbackTime / Date Search Playback SearchNavigation Vloss AlarmEvent Search USB socket Video ExportPage Call / Matrix Monitor Setup BRIGHTNESS, CONTRAST, Colour Display SettingsImage Position Adjustment on Monitor Screen Display EDA 966 Infrared Remote Control optional PC System Requirements Network AccessAccess VIA Internet Explorer Playback Reverse PlaybackPlayback Search Event list search modeTime / Date Search PTZ Control PresetAppendix a EDR Viewer Software Appendix a EDR Viewer SoftwareEDR Viewer Installation DVR Host Interface SpecificationSample control code packets Remote control protocolLength Byte Format of message packet is as follows16383 1111111 All DVR Connect to RS485/RS232 Remote keys OPcode=0x4B Opcode Byte & Data bytes OPcodeChecksum Byte Matrix command OPcode=0x4DAppendix D Recording times Head Office USA Office China Office Japan Office