EverFocus EDR-1640, EDR-920 manual Alarm Network alarm

If several users simultaneously access the DVR via network, each user requires a DATA PORT (max. 4 users). Upon activating ports, e.g. in firewalls, the following ports have to be opened additionally:

DATA PORT +1

DATA PORT +2

DATA PORT +3

Example: Dataport 37260 > ports to be opened : 37260, 37261, 37262, 37263

(6)HTTP PORT: Default setting for this port is: 80. The port can be changed if necessary.

(7)CONTROL PORT: Default setting for this port is: 1600. The port can be changed if necessary.

(8)DATA PORT: Default setting for this port is: 37260. The port can be changed if necessary.

ATTENTION:

(9)MAC ADDR: Display of network interface MAC address (cannot be changed).

3.7.2 ALARM (Network alarm)

NETWORK SETUP MENU
CONFIG	PROTOCOL	UDP
ALARM	PORT NUMBER	01600
EMAIL	UNIQUE ID	_ _ _ _ _ _ _ _ _
PASSWORD	SERVER1	192.168.001.122
	SERVER2	192.168.001.123
	SERVER3	192.168.001.124

Having installed the optionally available PowerCon software, the DVR can transmit a network alarm to up to 3 recipiants in case of event.

(1)PROTOCOL: Network alarm transmission protocol type TCP: TCP protocol transmission

UDP: UDP protocol transmission

(2)PORT : Network port through which the alarm is transmitted. This port must be set at the client’s side (recipiant) correspondingly.

(3)UNIQUE ID: DVR ID number, used for identification by the recipiant’s software.

43