EverFocus EMV200 user manual Front Panel

Event Alarm	SD card error, SD card temperature, SD card Full, SD card missing, Power Loss,
	Network Loss, GPS loss, GPS speed, GPS fencing
Email alert	Multiple email notifications in response to alarms and events. (Requires real time
	network connectivity though cellular device).
GPS Function	Embedded GPS Sensor(optional external GPS antenna required) for speed and
	geographic limit alarms (rectangular or circular fencing)
Configuration Method	On screen menu with ‘portable monitor friendly’ graphical user interface
Control/Setup	IR remote control, USB mouse, network I/F
Real time clock	Can be synchronized to GPS/NTP time source; flexible DST settings
Watchdog Function	Reboots DVR automatically if required
Networking	RJ45 socket, 10/100Mbps
	TCP-IP/DHCP/PPPoE/DDNS/SMTP/SSL/POP3/HTTP/NTP
Interface	RS-232, USB 2.0
Power Source	13.8/27.6VDC nominal; 10V~36VDC range (Built in surge protection, voltage
	regulation, programmable Delay On/Off relative to ignition or other switched
	voltage)
Dimensions	117 x 63 x 38.4mm / 4.6”x 2.5”x 1.5”
Weight	300g / 0.66lbs.
Operating Temp.	Working Temperature: -10 ~55 ; 14 ºF ~131 ºF
	Storage Temperature: -40℃~85℃; -40 ºF~185 ºF

1.4 FRONT PANEL

Your primary interaction with your new DVR will be through the Front Panel buttons and their corresponding buttons on the included IR Remote Control. Take a moment to learn where the keys are as the remainder of the manual will refer to them often.

Figure 1-1 Front Panel

3