EverFocus EMV200 user manual Configuration of DVR, Login

Chapter

3

3 CONFIGURATION

This chapter provides information for configuring EMV200.

3.1 CONFIGURATION OF DVR

EMV200 can be configured through On Screen Display Playback and Configuration

Connect to the “Main Mon” output with a monitor and use the mouse or the remote control to configure menu settings.

3.2 LOGIN

In order to access EMV200 options, users may be asked to log in for authority identification. To log in, follow these steps.

1.Right click on the screen to display the Main Menu

2.The following screen pops up:

Figure 3-1 Login page

3.Select the user name from the drop-down list and input the password. The defaults are: User name: admin (lower case)

Password: 11111111

To input password: click the password field to bring up the on-screen keyboard (see Figure 3-2 On-screen

Keyboard). Click on each button to input the desired characters for the password. When finished, click “ ” on the on-screen keyboard to confirm the password.

+ Click on the “Login” button to log in to the system.

16