EverFocus EMV200 user manual Record Settings

Page 34

Figure 4-7 Record Settings

4.3.1 Record

Record Overwrite: Check the box and the disk will begin overwriting when full. NOTE: Unless this box is checked, THE DVR MUST STOP RECORDING WHEN THE DISK IS FULL. The use of record overwrite is strongly recommended. If you do not use this feature, please be sure to make specific arrangements to monitor/be notified when the disk is full.

Power Delay-On: Set the delay time to supply power to the DVR in order to avoid excess consumption at ignition.

Power Delay-Off: Set the delay time to power off the DVR after ignition off. It can extend the recording time after ignition off.

Time Stamp: Select if the time and date will display while recording. Choose the location for the time display from Top, Bottom or Off.

Vehicle ID Stamp: Select if vehicle ID will display while recording. Selections are On and Off.

Auto Erase Video: The hard drive will automatically erase video after it has been on the hard drive for the selected number of days. To use the maximum hard drive space, choose “OFF”. (See Record Overwrite and notes above) This feature is useful if local rules and regulations require recorded video to be discarded after a specific number of days, or to limit the retention of older recorded video to clear space in anticipation of event recording.

Click button to return to the previous level of menu.

27

Image 34
Contents EMV200 DVR EMV200 DVR Safety Precautions Iii Table of Contents Networking Overview Linksys & D-LINK Port Forwarding Features Product OverviewPackage Contents SpecificationsFront Panel Front PanelRear panel Rear PanelGPS Antenna Connect to the GPS antenna System Connection Front & Rear Panel Connector Installation of EMV200Now you have completed all mounting procedures Trunk Users are suggested to use suspend for mounting option Installing the Cameras and Monitor Video INPUTS/OUTPUTS Installation Alarm Contacts InstallationAlarm Input Contacts USB-Mouse installationAlarm Output Relay Network Connection Direct PC Connection through Crossover Network CableFinal Install Process Network Connection through Patch CableMouse Operation This chapter will cover the basic operation using the mouseHow to select a channel General USB Mouse OperationClick the button to go to live view Field Input OptionsLogin ConfigurationConfiguration of DVR This chapter provides information for configuring EMV200Name Description Layout On Screen Configuration MenuDisplay mode Desired layout choiceArchive SearchMore details about search function Details about archive functionGPS Speed Search Search Menu GPS SearchSearch Menu GPS Bordering Search Event Search Prev Page Go to previous Next Page Go to nextArchive USB 10 Archive MenuDVR Configuration Configuration MenuNormal Camera SettingNo. Camera number Video Adjust Camera Settings-Video LossAlarm Record SettingSpeed Record Settings RecordALARM/GPS Alarm-Alarm SettingsPage Alarm-Event Settings 10 Alarm Event Settings12 Alarm Event SD Card Missing 16 Alarm Event Power Loss 17 Alarm Event Network Loss Network Loss18 Alarm Event GPS Loss GPS LossAlarm Video Loss 19 Alarm Video LossAlarm-GPS Speed 21 Alarm GPS SpeedAlarm-GPS Event Action Press to enter GPS Event Action MenuAlarm-GPS Fencing PressDate/Time Setting Date/Time SettingsDisplay Click button to set up daylight saving parametersDaylight Saving Monitor On Screen Display Click button to set up OSD parametersTitle Main Monitor Main Title Check the box to display main titleClick button to set up Layout parameters LayoutClick button to set up Sequence parameters Network SettingSequence LAN Settings 30 Network MenuPage Mobile Connection Settings Dynamic and/or Private Ports 49152 thruEmail Settings 33 Network Menu Email SettingsDdns Settings EverfocusDDNSAlarm Server Settings 36 Network Menu Alarm ServerMeta Server Settings 37 Network Menu Alarm ServerNetwork Test Remote/MobileSystem User40 System-User-Add Local Live View Copy Playback Configuration WebAdmin User Guest Live View Copy Camera2 I/O Control RS232Disk Info 43 System-Disk4 LOG 46 System-LogSettings Export Log to USB Press button to export log data to USBService Information 50 InformationSubnet Masks Introduction to TCP/IPGateway Address Pre-Installation Virtual PortsDo you have a static IP address? What is your Network Setup?What type of DVR are you installing? Do you have a dynamic IP address?Simple One to One Connection Page Page Direct High Speed Modem Connection Router or LAN Connection Page Page Connecting to EMV200 Remote Operation from BrowserBrowser Security Setting Installing ActiveX controlsPage Now, you will be able to see the remote live Enabling ActiveX ControlsPage Page Remote Live View Page Remote Playback Everfocus Ddns Setup Linksys & D-LINK Port Forwarding Typical Linksys Port ForwardingHttp Typical D-LINK Port Forwarding Schedule Understand User Interfaces SD Card ReaderInsert the SD card to PC and run To execute EMVPlayer Basic Operations Search VideoArchive Video from Video Window Archive and SnapshotSearch by Video Slide Bar Snapshot ImageTroubleshooting Transparent Mode Appendix a Timing of Alarm ModesTimeout + Transparent Mode Timeout Mode Permanent ModePage DVR will Auto adjust Quality Appendix B Express Setup Recording Value Selection RulesRecord With Recording days Standard Quality Max recording frame rate of DVRExtended Quality Appendix C Remote Control Channel keys #1~2EverFocus Electronics Corp