This menu defines the parameters for communicating with a PC.
Server IP1~3: IP address of client PC. The network alarm can be transmitted to up to 3 addresses.
Protocol: Select the protocol type for alarm transmission:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Port: Select the transmission port for network alarm messages
Network ID: The network ID is an identifier for the alarm transmitter (DVR sending the alarm).
Click 
button to return to the previous level of menu.
4.7.6Meta Server Settings
Figure 4-37 Network Menu – Alarm Server
Meta Server is the server to send out GPS Data to Central Management Software server.
Data Type: Only GPS Data is available for this model.
Check the “Send GPS Data to Remote Server” if you wish to send GPS Data to CMS server.
Check “Keep Connection Alive” to keep connection alive continuously. However selecting this option may occupy the network bandwidth.
Server IP: IP address of client PC.
Protocol: Select the protocol type for GPS data:
UDP: User Datagram Protocol
TCP: Transmission Control Protocol
Port: Select the transmission port for GPS data.
Time Interval (s): Set the time interval for sending the GPS data.
50