EverFocus EMV200 user manual Record Setting, Alarm, Speed

Page 33

4.2.3Alarm

Figure 4-6 Camera Settings-Alarm

Speed:

Maximum desired frame rate in frames per second (FPS) for event recording; if more than one camera requires simultaneous event recording, the total for all cameras cannot exceed the maximum available FPS for the DVR at the corresponding resolution setting, and the available FPS may be divided across the cameras responding to an event. In the example above, with 225 CIF FPS allocated and 255 CIF FPS remaining, it would be possible to increase the FPS rate on the two 4 CIF cameras from 10 FPS to 15 FPS and also increase the resolution and rate of the five 2 CIF cameras to 4 CIF and 15 FPS, with 15 CIF equivalent FPS still available to be assigned to one or more of the nine CIF resolution cameras. If not all event conditions occur simultaneously, greater resolution and/or FPS increases are possible for individual cameras, as long as the net total of 480 CIF equivalents is not exceeded.

Quality: Select an image quality for recording. There are five different qualities available: Superior, High, Standard, Basic and Low. A higher image quality uses more HDD space.

Resolution: Select recording resolution based on video format.

NTSC: 704x480 / 704x240 / 352x240

PAL: 704x576 / 704x288 / 352x288

Click button to enter Video Adjust menu.

Click to enter Camera-Normal setting menu.

Click button to return to the previous level of menu.

4.3 RECORD SETTING

Figure 4- is a screenshot of the RECORD SETTING MENU. This menu is used to configure basic recording settings.

26

Image 33
Contents EMV200 DVR EMV200 DVR Safety Precautions Iii Table of Contents Networking Overview Linksys & D-LINK Port Forwarding Product Overview FeaturesSpecifications Package ContentsFront Panel Front PanelRear Panel Rear panelGPS Antenna Connect to the GPS antenna System Connection Installation of EMV200 Front & Rear Panel ConnectorNow you have completed all mounting procedures Trunk Users are suggested to use suspend for mounting option Installing the Cameras and Monitor Alarm Contacts Installation Video INPUTS/OUTPUTS InstallationUSB-Mouse installation Alarm Input ContactsAlarm Output Relay Direct PC Connection through Crossover Network Cable Network ConnectionNetwork Connection through Patch Cable Final Install ProcessHow to select a channel This chapter will cover the basic operation using the mouseMouse Operation General USB Mouse OperationField Input Options Click the button to go to live viewConfiguration of DVR ConfigurationLogin This chapter provides information for configuring EMV200Display mode On Screen Configuration MenuName Description Layout Desired layout choiceMore details about search function SearchArchive Details about archive functionSearch Menu GPS Search GPS Speed SearchSearch Menu GPS Bordering Search Prev Page Go to previous Next Page Go to next Event Search10 Archive Menu Archive USBConfiguration Menu DVR ConfigurationCamera Setting NormalNo. Camera number Camera Settings-Video Loss Video AdjustRecord Setting AlarmSpeed Record Record SettingsAlarm-Alarm Settings ALARM/GPSPage 10 Alarm Event Settings Alarm-Event Settings12 Alarm Event SD Card Missing 16 Alarm Event Power Loss Network Loss 17 Alarm Event Network LossGPS Loss 18 Alarm Event GPS Loss19 Alarm Video Loss Alarm Video Loss21 Alarm GPS Speed Alarm-GPS SpeedPress to enter GPS Event Action Menu Alarm-GPS Event ActionPress Alarm-GPS FencingDate/Time Settings Date/Time SettingClick button to set up daylight saving parameters DisplayDaylight Saving Title Click button to set up OSD parametersMonitor On Screen Display Main Monitor Main Title Check the box to display main titleLayout Click button to set up Layout parametersNetwork Setting Click button to set up Sequence parametersSequence 30 Network Menu LAN SettingsPage Dynamic and/or Private Ports 49152 thru Mobile Connection Settings33 Network Menu Email Settings Email SettingsEverfocusDDNS Ddns Settings36 Network Menu Alarm Server Alarm Server Settings37 Network Menu Alarm Server Meta Server SettingsRemote/Mobile Network TestUser System40 System-User-Add Admin User Guest Live View Copy Playback Configuration WebLocal Live View Copy CameraRS232 2 I/O Control43 System-Disk Disk Info46 System-Log 4 LOGExport Log to USB Press button to export log data to USB SettingsService 50 Information InformationIntroduction to TCP/IP Subnet MasksGateway Address Virtual Ports Pre-InstallationWhat type of DVR are you installing? What is your Network Setup?Do you have a static IP address? Do you have a dynamic IP address?Simple One to One Connection Page Page Direct High Speed Modem Connection Router or LAN Connection Page Page Remote Operation from Browser Connecting to EMV200Installing ActiveX controls Browser Security SettingPage Enabling ActiveX Controls Now, you will be able to see the remote livePage Page Remote Live View Page Remote Playback Everfocus Ddns Setup Typical Linksys Port Forwarding Linksys & D-LINK Port ForwardingHttp Typical D-LINK Port Forwarding Schedule SD Card Reader Understand User InterfacesInsert the SD card to PC and run To execute EMVPlayer Search Video Basic OperationsSearch by Video Slide Bar Archive and SnapshotArchive Video from Video Window Snapshot ImageTroubleshooting Appendix a Timing of Alarm Modes Transparent ModeTimeout + Transparent Mode Permanent Mode Timeout ModePage Appendix B Express Setup Recording Value Selection Rules DVR will Auto adjust QualityRecord With Recording days Max recording frame rate of DVR Standard QualityExtended Quality Channel keys #1~2 Appendix C Remote ControlEverFocus Electronics Corp