EverFocus EDSR-400, EDSR-600 instruction manual Record Setting Menu

MENU

6.8 RECORD SETTING MENU

RECORD SETTING MENU

NORMAL RECORD

SPEED	: 50 IPS
QUALITY	: STANDARD
DISK FULL	: REWRITE
ALARM RECORD	ON
OPERATION
SPEED	: 50 IPS
QUALITY	: STANDARD
PRE-ALARM RECORD
OPERATION	ON

In NORMAL RECORDING MENU, we define

(1)NORMAL RECORD:

SPEED : To set the normal recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Video recording quality setup for setting the quality of the vi deo picture by selecting a compression rate. There are six quality levels for recording

LOWER	: 15 KB
LOW	: 19 KB
BASIC	: 23 KB
STANDARD : 27 KB
HIGH	: 31 KB
SUPERIOR	: 35 KB

DISK FULL: Set REWRITE or STOP when HDD is full.

(2)ALARM RECORD (for Alarm In and Motion detection):

OP (Operation): Select ON or OFF to activate alarm recording or not.

SPEED : To set the alarm and motion recording speed. Maximum 60 (NTSC) / 50 (PAL).

QUALITY: Video recording quality setup, this item lets you set the quality of the video picture by selecting a compression rate.

NOTE: The recording rates are for the total system: The single camera record rate is: Camera record rate = System record rate / Number of connected cameras Example: Record Rate 60 IPS, 6 connected cameras: 10 IPS / camera

(3)PRE-ALARM RECORD: (with Alarm In and Motion)

Pre – Alarm duration is depending on record quality (about 8-15 seconds). OP (Operation): Select ON or OFF to activate pre-alarm recording or not .

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

Press CALL key to confirm the option and move to previous column.

CALL

Press MENU key to return to Main Menu, press again to leave Set up Menu.

MENU

19