EverFocus EDSR-600, EDSR-400 Appendix C Serial Interface Specifications, Dvr, Host

Page 51

Appendix C: Serial Interface Specifications

Serial Interface Specifications

1. RS-232 pin assignment

The DVR may be controlled by a computer or a terminal via the standard

D-SUB 9-pin RS-232 connector.

The pin assignment of the D-SUB 9-pin connector

1 2 3 4 5

6 7 8 9

DVR

PIN # NAME

1NOT CONNECTED

2TXD

3RXD

4NOT CONNECTED

5GROUND

6NOT CONNECTED

7NOT CONNECTED

8NOT CONNECTED

9NOT CONNECTED

		HOST

	PIN #	NAME
1		NOT CONNECTED
	2	RXD
3		TXD
4		NOT CONNECTED
5		GROUND
6		NOT CONNECTED
7		NOT CONNECTED

8NOT CONNECTED

9 NOT CONNECTED

2. Transmission setting

There are 6 different speeds that can be used to transmit instruction or information through the RS232/RS485 port on the device, 1200 baud, 2400 baud, 4800 baud, 9600 baud, 19200 baud and 3840 baud.

The default setting from the factory is 9600 baud.

Please refer to Chart 6.10 (Page21) for details.

46

Image 51

Contents V1.05 2004/3/25 EDSR-600Safety Precautions Power Disconnect Important Safeguards Important SafeguardsTable of Contents Product Overview Product OverviewSpecifications SpecificationsVideo Back Panel ConnectionsBack Panel Connections ON/OFFAlarm I/O Refer pin assignment in Appendix-D, Before Installation System ConnectionSystem Connection Chanel Keys Front Panel KeypadsFront Panel Keypads Shuttle Ring and JOG DialIR Remote Controller receiver Insert a HDD IDE for Video Storage Press Menu key to enter SET UP MenuOperation OperationMenu Flow Menu flowCall CLOCK/LANGUAGE Setting Menu , we define Clock Setting MenuWrong DLY Start 2000 Stop Correct DLY Start 2000 Stop Timer Setting MenuSequence Setting MENU, we define for Main Monitor Sequence Setting MenuTitle Setting Menu , we define Title Setting MenuCovert Setting Menu Covert Setting Menu , we defineDefault setting is OFF for all cameras Alarm Recording MENU, we define Alarm Record Setting MenuMotion Setting Menu Motion Record Setting MENU, we defineOP Operation Default OFF Press 1-4/6 to Manual Edit Record Setting Menu MAC Address Network Setting MenuNetwork Setting MENU, we define USER-NAME Password LevelControl Setting MENU, we define Control Setting MenuBuzzer Setting Menu Water Mark Archive Setting MenuPicture Size Time StampCH, DWELL, Event Call Monitor Setting MenuDisk Setting Menu Disk Setting MENU, we defineDisk Usage HDD-1, HDD-2 System Setting Menu System Setting MENU, we definePlay with Audio AUDIO-1, AUDIO-2 REC Alarm RecordingRecording Instant RecordingPause Playing BackNormal Playback PlayEnter Search PlaybackSearch Playback SearchAlarm List search playback Search Stop Date/Time Search PlaybackData Export Still Image CopyPause Copy Menu Copy to Movie FileDisplay AlarmExport Event LOG List Press „DISPLAY key and hold key for about 2 secondsMain Monitor Mode Display ZoomMonitor Views / Operation Call monitorCall Monitors Setting Call MonitorRemote Control 11.1 RS-485 Remote ControlRJ45 RS485 pin assignment IR Remote Controller IR Remote Controller optionalEDSR600 Channel keys #1~6 #1~16 valid for EDSR900/1600 only View From Internet/Intranet Main Screen View From Internet/Intranet View From Internet/Intranet Appendix-A Specifications? When Recording with 160GB HDD Appendix-BEstimated with typical image-low noise level 59259.3 ? When Recording with 320GB HDDAppendix C Serial Interface Specifications DVRHost Sample control code packets Remote Control ProtocolLength Byte Format of message packet is as followsReceiver ID Checksum Byte Opcode Byte & Data bytesOPcode Remote keys OPcode=0x4BALM1~ALM4 EDSR400, ALM1~ALM6 EDSR600 Alarm I/O pin assignmentAppendix-D PIN #Japan Office Head Office European OfficeBeijing Office USA Office