MENU
6.13 CALL MONITOR SETTING MENU
CALL MONITOR SETTING MENU
CH | DWELL | EVENT |
00 | 07 SECS | NONE |
00 | 07 SECS | NONE |
00 | 07 SECS | NONE |
00 | 07 SECS | NONE |
(00 | 07 SECS | NONE) |
(00 | 07 SECS | NONE) |
Columns in brackets () only valid for
In the CALL MONITOR SETTING MENU, we define the sequences of each CH for call monitor .
CH, DWELL, EVENT:
(1)CH (Channel): Select the camera to be shown in the standard sequence of this call monitor. With setting “00” the channel will be skipped in the sequence.
(2)DWELL (Dwelling time): Set 0~99 seconds for the dwelling time of each camera.
(3)EVENT: Set the alarm and correspondent motion to the camera.
NONE: no alarm or motion action is assigned to this camera.
MOTION: If MOTION detection is active for this camera, the camera will be displayed, if motion is detected. After alarm record duration the monitor switches back to standard sequence or spot camera (depending on operation).
A01 ~ A06: The camera will be displayed, if selected alarm input is active.
Turn the JOG dial clockwise or
Press ENTER key to confirm the option and move to next column.
ENTER
Press CALL key to confirm the option and move to previous column.
CALL
Press MENU key to return to Main Menu, press again to leave Set up Menu.
MENU
24