Clover Electronics CDR1660, CDR0860, CDR0460 manual Sensor Connection, Connection of Monitor

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

6.3.2. CONNECTION OF MONITOR

Connect the composite Video Output (VIDEO OUT) of the DVR to the Video IN of Monitor as shown in the below diagram.

6.4. SENSOR CONNECTION

If you want, you can install sensors on your DVR system. There are four sensor signal input terminals on the DVR. To install sensors on the DVR, follow the instruction below. The sensor signal input terminals are on the rear panel of the DVR.

a)Connect the signal lines of the sensors as shown in below diagram.

b)Connect the power lines of the sensors.

< Model: CDR0860 >

NOTE:

Two signal input terminals are assigned to one channel.

25