MODEL: CDR1660 / CDR0860 / CDR0460 H.264
Click the PTZ button of the channel where the PTZ camera is connected and select the appropriate protocol type. Or in case of using the remote controller or the front panel buttons, highlight the PTZ button of the channel where the PTZ camera is connected and press the ENTER button and then highlight the desired value and press the ENTER button. The default is NONE.
d)BAUD RATE
You have to select the appropriate communication speed. Available speeds are from 1200 to 57600.
Click the BAUD RATE button of the channel where the PTZ camera is connected and select the communication speed. Or in case of using the remote controller or the front panel buttons, highlight the BAUD RATE button of the channel where the PTZ camera is connected and press the ENTER button and then highlight the desired value and press the ENTER button.
The default is 9600.
e)ID
You have to select and match the PTZ camera address. For example, if the PTZ camera is set to address 2, then the ID should be set to 2.
Click the ID button of the channel where the PTZ camera is connected and click the matching PTZ
camera address and then click the ENTER ( 
) button. Or in case of using the remote controller or the front panel buttons, highlight the ID button of the channel where the PTZ camera is connected and press the ENTER button and then move the cursor using the ▲,▼,◀, ▶ buttons and press the ENTER button. Press the ESC button to save and exit the changed value.
The default is 1.
58