Clover Electronics CDR1660 manual Recording Speed Frames PER Second, Model Half D1, Cif, Quality

MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6

8.2.1.2. RECORDING SPEED (FRAMES PER SECOND)

This allows the user to configure the recording speed (FPS) for each channel.

Click the F/S button of the desired channel in the RECORDING SETUP menu and select one of the recording speed among 1, 2, 4, 5, 6, 8, 10, 15, 30 and OFF on the pop-up window by clicking the mouse.

Or in case of using the remote controller or the front panel buttons, highlight the F/S button to be changed using the ▲,▼,◀, ▶ buttons and press the ENTER button and then select the desired value on the pop-up window using the ▲,▼,◀, ▶ buttons and press the ENTER button.

NOTE:

You can see the used frames and the remained frames on the above window according to setting.

If the entire sum has been exceeded in the middle choice of the F/S, is not a choice.

* Maximum recording rate per resolution
Model	D1	Half D1	CIF
CDR0460 (4channel)	60fps	120fps	120fps
CDR0860 (8channel)	60fps	120fps	240fps
CDR1660 (16channel)	60fps	120fps	240fps

8.2.1.3. QUALITY

Defines the record quality of each channel. There are 4 quality levels, LOW, NORMAL, FINE and BEST.

Click the QUALITY button of the desired channel in the RECORDING SETUP menu and select one of the recording qualities among LOW, NORMAL, FINE and BEST on the pop-up window by clicking the mouse. Or in case of using the remote controller or the front panel buttons, highlight the QUALITY button to be changed using the ▲,▼,◀, ▶ buttons and press the ENTER button and then select the desired value on the pop-up window using the ▲,▼,◀, ▶ buttons and press the ENTER button.

64