MODEL: CDR1660 / CDR0860 / CDR0460 H.264
Click the PTZ button on the MENU bar or press the PTZ button of the remote controller in the live mode to access the PAN/TILT cameras.
①ZOOM: Zoom in and out by clicking on the - or + buttons.
② FOCUS: Focus in and out by clicking on the – or + buttons.
③ IRIS: Control the iris open and iris close by clicking on the – or + buttons.
④ HOME: Return the PTZ camera to Home position by clicking this button.
⑤ AF(Auto Focus): Toggle Autofocus on or off by clicking on this button.
⑥ SPEED: Select the movement speed ratio by clicking on the – or + buttons.
⑦ Set preset points: Move the PTZ camera to the desired location, and then click on any of the 16 buttons to set a preset position.
⑧ Move to preset points: Click on any of the 16 buttons to move the PTZ camera to predefined preset position.
⑨ Directional buttons: Move the PTZ camera using the directional buttons.
⑩ EXIT: Click this button to exit the PTZ control bar or click the right button of the mouse on the screen.
7.6. RECORD
This system provides Watchdog function.
When power goes off during recording and then the power turns on, the system will automatically start recording.
If you start to record, the circles representing the channel status will change color based on the recording mode. (Refer to 2) CHANNEL STATUS of chapter 7.4 MAIN SCREEN on page 28.)
NOTE:
In case of record modes except for the manual (continuous) recording, you don’t have to press the REC button. To turn on the REC button means to start the manual (continuous) recording so if you want EVENT recording or SCHEDULE recording, do not turn on the REC button.
7.6.1. MANUAL (CONTINUOUS) RECORDING
Click the REC icon on the MENU bar, press the RECORD button of the remote controller or the REC button of the front panel in the live mode and the system will start the manual (continuous) recording.
34