17
Still need assistance?
If you need assistance, visit our website at www.knollsystems.com, or call us at 1 800 566 5579. during Pacific west coast time. This product is backed by a limited warranty. An extended warranty plan may be purchased from your retailer or dealer.
When sending the projector in for repair, we recommend shipping the unit in its original packing material, or having a professional packaging company pack the unit. Please insure your shipment for its full value.
Using the remote control
The remote uses two provided AA batteries. They are easily installed by sliding the cover off the remote‟s back, aligning the
+and - ends of the batteries, sliding them into place, and then replacing the cover.
To operate, point the remote at the projection screen or at the front of the projector (not at the video device or computer). The range of optimum operation is up to 30 feet (9.14m).
Press the remote‟s Menu button to open the projector‟s menu system. Use the arrow buttons to navigate, and the Select button to select features and adjust values in the menus
The remote also has:
•Power button to turn the projector on and off (page 12 for shutdown info)
•Help button to access the projectors help feature
•Source buttons to switch among sources
•Resize button to change the Aspect Ratio
•Auto Image button to resynchronize the projector to the source
•Preset button to select stored settings (see page 18)
•Overscan button to remove noise at the edge of a video image
•Custom button that can be assigned to a special function, like Blank Screen or Freeze
•Source 1, 2, 3 switches between user assigned sources.
Troubleshooting the remote
•Make sure the batteries are installed properly and are not dead.
•Make sure you‟re pointing the remote at the front of the projector or at the screen, not at the video device or the computer, and are within the remote range of 30 feet (9.14m).
