Knoll Systems HDP6000 user manual Setup menu

22

Setup menu

Language: Allows you to select a language for the onscreen display.

Key Click: Turns the key click sound on or off. When this setting is on, pressing keys on the keypad causes the projector‟s speaker to play a “click” sound.

Custom Key: Allows you to assign a different function to the Custom button, allowing you to quickly and easily use the effect. Highlight an effect and press Select to choose a different one.

•Source Info: The default action. Shows the Source Info menu.

•Projector Info: Shows the Projector Info menu.

•Aspect Ratio: Sets the ratio of image width to image height.

•Auto Image: Resynchronizes the projector to the source.

•Overscan: Removes noise around the image.

•Blank Screen: Displays an empty screen.

•Freeze Screen: Pauses the projected image.

•Source: Cycles through available sources.

•Closed Caption: Enables or disables Closed Captioning.

•SplitScreen: Enables or disables SplitScreen. Before using this for the first time, configure SplitScreen sources and layouts using the SplitScreen menu

Source Key Enable: Enables or disables Source Keys on the

optional Commander-2 remote.

AC Power On: When this feature is on, the projector automatically turns on when electrical power is connected. This allows control of ceiling mounted projectors with a wall power switch.

Auto Off Time: Automatically turns the projector off after no signals are detected for a preset number of minutes. If an active signal is received before the projector powers down, the image will be displayed.

Screen Save Time: Automatically blanks the screen with a black color after no signals are detected for a preset number of minutes. The image returns when an active source is detected or

a remote or keypad button is pressed.

Sleep Timer: Allows the projector to automatically power off after it has been on for a specified amount of time.

Always-On Functions: Allows you to control which projector functions will work even when the projector is in standby (powered off but connected to AC Power). Press Up or Down to highlight the function you want to change, then press select or left and right to change the function to either Yes or No. Press menu when done. Note that some functions must always have the same value; in this case when you change one value, other values in the submenu may also change automatically.

Lamp High Power: Toggles between on and off. Turn it on to raise the light output of the lamp. This also raises the fan speed, making the projector louder. Default is off.

Power Sounds: Controls whether the projector makes a sound when powered on & off.

Auto Source: When this feature is on, the projector automatically finds the active source,

checking the selected Power-up Source first. When this feature is off, the projector defaults to

the source selected in Power-up Source. To display another source, you must manually select

one by pressing the Source button on the remote or keypad.

Power-up Source: Determines which source the projector checks first for active video during power-up.

HDMI DDC: When this feature is set to on, the projector will support and older DVD player for HDMI port.

Fast Color Refresh: Changes the color wheel speed from 4x to 6x.