Motorola DCT3080 manual Access, Initialize BPI, System Up, IP Addresses

	DCT3080 Installation Manual
Field	Description
eCM	Displays whether the embedded cable modem has registered
Registered	with the cable modem termination system (CMTS):

ƒYES — DOCSIS registration is complete

ƒNO — DOCSIS registration is in progress or the set-top could not register

ƒN/A — The value is invalid or cannot be retrieved, or DOCSIS is not enabled

Network	Displays whether the cable modem has been granted access to
Access	the DOCSIS network:
	ƒ YES — The cable modem was granted DOCSIS network
	access
	ƒ NO — The set-top is obtaining DOCSIS network access
	ƒ N/A — The value is invalid or cannot be retrieved, or
	DOCSIS is not enabled
Initialize BPI	The Baseline Privacy Interface (BPI) status:
	ƒ YES — BPI has been successfully initialized for the cable
	modem
	ƒ NO — BPI initialization is in progress, has failed, or was
	not requested by the network
	ƒ N/A — The value is invalid or cannot be retrieved, or
	DOCSIS is not enabled
System Up	The Days, Hours, Mins (minutes) and Seconds the DOCSIS
Time	system has been operational. If the value is invalid or cannot be
	retrieved, or DOCSIS is not enabled, each field displays zeros.
IP Addresses	The Cable Modem and Set-TopIP addresses in dotted-
	decimal format xxx.xxx.xxx.xxx. Each byte value is padded with
	zeros when necessary. For example, 10.0.1.10 is displayed as
	010.000.001.010. If the value is invalid or cannot be retrieved,
	or DOCSIS is not enabled, 000.000.000.000 is displayed.
MAC	The Cable Modem and Set-TopMAC address in hexadecimal
Addresses	format xx:xx:xx:xx:xx:xx. Each byte value xx ranges from 00 to
	FF and is padded with zeros when necessary. For
	example,0:0:2D:1:F1:D is displayed as 00:00:2D:01:F1:0D. If
	the value is invalid or cannot be retrieved, or DOCSIS is not
	enabled, 00:00:00:00:00:00 is displayed.
	78