Motorola DCT3080 manual Video Connection Options, Composite

DCT3080 Installation Manual

1Start the Diagnostics as described in Section 4, “Diagnostics.” d 01 is displayed on the front-panel LED.

2Using a remote control, within five seconds press REPLAY, MY DVR three times, and LIVE TV. (On some remote controls, the MY DVR key may be labeled “LIST.”)

If you correctly enter this key sequence in five seconds or less, the hard drive is cleared and the front-panel LED displays Clr.

3If Clr is not displayed, re-enter the key sequence in step 2.

If Clr is displayed, press any other key to reset the terminal, turn it off, and complete the clearing process.

Video Connection Options

Use the following guidelines to determine the best video connection for the subscriber home entertainment system. To determine the available video inputs on the TV, check the manual supplied with the TV or the TV itself.

The DCT3080 offers the following video outputs:

S-Video	SDTV	If your TV has an S-Video input, use S-Video. S-Video is
	only	the highest quality standard-definition video output on
		the DCT3080.
Video	SDTV	If your TV does not have an S-Video input, use the
(composite)	only	composite video (VIDEO) output.
RF	SDTV	If your TV only has a coaxial RF input, connect it to the
	only	DCT3080 RF OUT connector.

19