Axisoft Tech 2460 manual Modem Settings, Using a Pan/TIlt/Zoom device, Communication Settings

Page 42

42

System Options

AXIS 2460 User’s Manual

Using a Pan/TIlt/Zoom device

To use a PTZ device, select the port which will connect the device and select the interface to use. Then click Save. Now click on the menu link for Pan/Tilt/Zoom. The resulting dialog will now allow you to select the driver for the PTZ you are using. Select the camera(s) that will be controlled by the device and finally, click the Save button. To make specific settings for the device, click the Modify... button. See the online help for more information.

Setting the RS-232 Port for use with a Modem (COM-Port 2 only)

From System Options in the Administration tools, select COM-Port 2 and click the radio button for Modem. Click Save. To configure the modem, click on the Modem link (also from the System Options on the main Administration page).

Modem Settings

If you are intending to use your AXIS 2460 over a dial-up modem connection, define the appropriate communication settings for your modem and click the Save button. Note that a modem can be used only on COM-port 2.

Communication Settings

Modem Type - Select a modem from the list of supported V.90 compatible modems in the drop-down list - selecting Generic if the modem you want to use does not appear in the list.

Note: Although most external modems are known to work well with the AXIS 2460, only the modems listed in the drop-down list have been fully tested.

Disable Incoming Calls - Check this box if you do not want your modem to answer incoming calls.

Flow Control - Synchronizes the connected modems. Hardware flow control is accomplished by enabling the Control to Send (CTS) and Return to Send (RTS) signals for the serial interface. If using Software control, the modems will still be synchronized, but the flow control will use XON/XOFF. If using NONE, there will be no synchronization.

Baud Rate (bps) - Set the baud rate for the connected modem.

Init String - This defines the Attention Code (AT) command sent when starting the dial-up connection, to initialize the connected modem. Using the Attention Code ATz (the common code for initializing most commercial modems), the Network DVR will normally configure the port settings for the connected modem automatically.

Page 41 Page 43
Image 42
Page 41 Page 43
Contents Axis Network DVR User’s Manual Axis 2460 User’s Manual Table of Contents Axis 2460 User’s Manual Features and Benefits Product OverviewAxis 2460 User’s Manual Product Overview Product Overview Axis 2460 User’s Manual Axis 2460 User’s Manual Product Overview Product Overview Axis 2460 User’s Manual Description Front PanelAxis 2460 User’s Manual Description Rear Panel Description Axis 2460 User’s ManualChecking The Hardware Inventory Mounting the RecorderAxis 2460 User’s Manual Checking The Hardware Inventory Installing the Axis 2460 Network DVR Network InstallationInstalling the Axis 2460 Network DVR Verifying and Completing the Installation From Your Browser Installing via the Null Modem Cable Connecting Your Computer Using the Null Modem CableCreating a Dial-Up Networking Connection Verifying the Connection and Completing the Installation Click ConfigureConnecting and Configuring Cameras Complete Camera SettingsConnecting and Configuring Cameras Axis 2460 User’s Manual Input/Modulation for Camera Pan Tilt ZoomAbout Events Setting up Events and AlarmsSetting up Events and Alarms Axis 2460 User’s Manual Recording Options OverviewAxis 2460 User’s Manual Setting up Events and Alarms Creating a Simple EventConfiguring an Alarm Input Configuring AlarmsCreating an Alarm-Controlled Event Output Relay SettingsComplete Event Settings Editing Events Event is ActivatedEdit Event Time Period Settings Alarm Input SettingsRecording Buffer Settings Pan/Tilt/Zoom ControlOutput Relay Complete Alarm Settings Send an email to email address when this event occursInput Settings Event Examples Example 1 Smoke detectionExample 2 Night time entry Example 3 Entry to Boiler Room at night Working with Recordings Recordings ListWorking with Recordings Axis 2460 User’s Manual Viewing a Recording Searching for a RecordingAxis 2460 User’s Manual Working with Recordings Locking a Recording Axis Video Player Simple PlaybackAlarm Inputs Time ZoomCreating an AVI Movie Other FunctionsAbout Codecs Accessing The System Options System OptionsAxis 2460 User’s Manual System Options System Options Overview System Options Axis 2460 User’s ManualNetwork Settings Automatic ConfigurationManual Configuration Bandwidth Control Mail SettingsEvent Message Settings Mail ServersSystem Log Message Settings Mail Reply SettingsCOM-Ports Modem Settings Using a Pan/TIlt/Zoom deviceCommunication Settings Current Network DVR Time ISP SettingsDate & Time New Network DVR TimeSystem Options Axis 2460 User’s Manual Users Adding UsersChanging the properties for existing Users Firewall SettingsDeleting Users Adding Allowed IP AddressesMaintenance Maintenance AdvancedSupport Factory Default Settings Axis 2460 User’s Manual Factory Default SettingsSelecting the Recording Mode Appendix a Recording Storage and ReductionRecording Storage and Reduction Axis 2460 User’s Manual Normal ModeApproximate Storage Times PriorityStatus Appendix B The LED Indicators LED Indicators Axis 2460 User’s ManualChecking the Firmware Appendix C TroubleshootingAxis 2460 User’s Manual Troubleshooting Pinging Your IP AddressSymptoms, Possible Causes and Remedial Actions Troubleshooting Axis 2460 User’s ManualFaulty configuration Appendix D Other IP Setup Methods Other IP Setup Methods Axis 2460 User’s ManualSetting the IP Address with Axis IP Installer Using the Axis IP InstallerInstalling the Axis IP Installer Axis 2460 User’s Manual Other IP Setup MethodsOther IP Setup Methods Axis 2460 User’s Manual Checking the Firmware Version Obtaining Updated Firmware Updating the FirmwareAppendix E Updating the Firmware Axis 2460 User’s Manual Updating the FirmwareAppendix F Installing Hard Disks Installing Hard Disks Axis 2460 User’s ManualAxis 2460 User’s Manual Installing Hard Disks Unit Connectors Axis 2460 User’s Manual Appendix G Unit ConnectorsRS-232 Serial Connectors Pinout InformationI/O Terminal Block Connector Connector PinoutAxis 2460 User’s Manual Unit Connectors Digital Inputs Controlling and MonitoringRelay Output Querying the Status of Digital InputsBNC Video Outputs Ethernet Network ConnectorBNC Video Inputs About RS-485Schematic Diagram With Possible Applications SupplyAppendix H Technical Specifications Axis 2460 User’s Manual Technical SpecificationsTechnical Specifications Axis 2460 User’s Manual Index Index

2460 specifications

Axisoft Tech 2460 is a cutting-edge technological solution designed to meet the dynamic demands of modern industries. This innovative platform marries advanced software capabilities with robust hardware specifications. At its core, the Axisoft Tech 2460 is engineered to enhance productivity, streamline processes, and provide an intuitive user experience, making it an integral tool for businesses aiming to leverage technology for competitive advantage.

One of the standout features of the Axisoft Tech 2460 is its high-performance processing unit. Equipped with a powerful multi-core processor, the device ensures efficient multitasking and rapid data handling. This allows users to execute complex tasks without delays, resulting in improved workflows and enhanced overall efficiency. The system’s architecture is designed to support scalability, making it ideal for both small enterprises and large corporations.

In terms of connectivity, the Axisoft Tech 2460 supports a variety of protocols, including Wi-Fi, Bluetooth, and Ethernet, ensuring seamless integration with existing systems. This versatility allows businesses to adopt the platform without overhauling their current infrastructure, minimizing disruption and maximizing return on investment. Additionally, its cloud connectivity features enable remote access and collaborative capabilities, facilitating real-time communication among teams, regardless of location.

Security is a paramount concern for businesses today, and the Axisoft Tech 2460 addresses this with state-of-the-art encryption technologies and user authentication mechanisms. These security features protect sensitive data and ensure compliance with industry regulations, providing peace of mind for organizations.

The user interface of the Axisoft Tech 2460 is intuitively designed, promoting ease of use. Its customizable dashboards enable users to tailor their experience to their specific needs, representing data and analytics in a manner that is both accessible and informative. The system also boasts compatibility with various applications, which furthers its functionality and adaptability.

In summary, Axisoft Tech 2460 stands out for its exemplary performance, connectivity options, security features, and user-friendly interface. By leveraging advanced technologies, it empowers organizations to innovate and remain competitive in an ever-evolving marketplace. Whether enhancing operational efficiency or facilitating collaboration, the Axisoft Tech 2460 proves itself as a valuable asset for any forward-thinking enterprise.
Top Page Image Contents