Axisoft Tech 2460 manual I/O Terminal Block Connector, Connector Pinout

Page 65

AXIS 2460 User’s Manual

Unit Connectors

65

The I/O Terminal Block Connector

Typically used in association with programming scripts for developing applications for event triggering, alarm notification via e-mail, etc., the 16-pin I/O Terminal Block is located on the rear panel and provides the interface to: a single relay switch output, four digital photo-coupled inputs, and an RS-485 interface. See page 67 for more information about RS-485.

This section describes the pinout, interface support and the control and monitoring functions provided by this connector.

Connector Pinout

The pinout for the Terminal Block (illustrated above) and signaling details for each pin is fully described in the table below:

Pin

Function

Description

1Not connected.

2Not connected.

3Digital Input 3 - Photocoupler Anode (+) Photocoupled Input 3: Electrically isolated from the chassis and connec-

4

Digital Input 3 - Photocoupler Cathode (-)

tors, this input can be supplied from an external DC voltage or the DC

 

 

Power Input/Output on pins 9 and 10. Driven by 5-24V.

5

Digital Input 4 - Photocoupler Anode (+)

Photocoupled Input 4. As above.

6

Digital Input 4 - Photocoupler Cathode (-)

 

7

RS-485 - B (inverting)

Serial Port 1- RS-485. A half-duplex RS-485 interface for controlling

8

RS-485 - A (non-inverting)

auxiliary equipment. Note: Serial Port 1 is programmed as either

 

 

RS-232 (COM1 Connector) or RS-485 (Terminal Block Connector), via

 

 

the browser interface.

9

DC + Power Output 12V

This can drive the photocoupler inputs or other equipment; such as an

10

DC - Power Output

IR-sensor. A maximum current of 50mA can be sourced from the DC

 

 

output. Pin 10 is connected to the unit chassis and to Ground on each

 

 

serial port and video input. See the schematic diagram on page 68.

11

Digital Input 1 - Photocoupler Anode (+)

Input 1 Photocoupler input. As for Input 3.

12

Digital Input 1 - Photocoupler Cathode (-)

 

13

Digital Input 2 - Photocoupler Anode (+)

Input 2 Photocoupler input. As for Input 3.

14

Digital Input 2 - Photocoupler Cathode (-)

 

15

Relay Switch

Relay switch - electrically isolated from chassis and connectors.

16

Relay Switch

 

Note: For compatible replacement connectors, please contact Axis. Alternatively, contact http://www.phoenixcontact.com, quoting: MC1.5/8-ST-3.81 (art no 1803633).

Image 65
Contents Axis Network DVR User’s Manual Axis 2460 User’s Manual Table of Contents Axis 2460 User’s Manual Axis 2460 User’s Manual Product Overview Features and BenefitsProduct Overview Product Overview Axis 2460 User’s Manual Axis 2460 User’s Manual Product Overview Product Overview Axis 2460 User’s Manual Axis 2460 User’s Manual Description DescriptionFront Panel Description Axis 2460 User’s Manual Rear PanelAxis 2460 User’s Manual Checking The Hardware Inventory Checking The Hardware InventoryMounting the Recorder Network Installation Installing the Axis 2460 Network DVRInstalling the Axis 2460 Network DVR Verifying and Completing the Installation From Your Browser Connecting Your Computer Using the Null Modem Cable Installing via the Null Modem CableCreating a Dial-Up Networking Connection Click Configure Verifying the Connection and Completing the InstallationConnecting and Configuring Cameras Axis 2460 User’s Manual Connecting and Configuring CamerasComplete Camera Settings Pan Tilt Zoom Input/Modulation for CameraSetting up Events and Alarms Axis 2460 User’s Manual Setting up Events and AlarmsAbout Events Recording Options OverviewCreating a Simple Event Axis 2460 User’s Manual Setting up Events and AlarmsCreating an Alarm-Controlled Event Configuring AlarmsConfiguring an Alarm Input Output Relay SettingsComplete Event Settings Edit Event Editing EventsEvent is Activated Alarm Input Settings Time Period SettingsOutput Relay Recording Buffer SettingsPan/Tilt/Zoom Control Input Settings Complete Alarm SettingsSend an email to email address when this event occurs Example 2 Night time entry Event ExamplesExample 1 Smoke detection Example 3 Entry to Boiler Room at night Working with Recordings Axis 2460 User’s Manual Working with RecordingsRecordings List Axis 2460 User’s Manual Working with Recordings Viewing a RecordingSearching for a Recording Locking a Recording Simple Playback Axis Video PlayerTime Zoom Alarm InputsOther Functions Creating an AVI MovieAbout Codecs Axis 2460 User’s Manual System Options Accessing The System OptionsSystem Options System Options Axis 2460 User’s Manual System Options OverviewManual Configuration Network SettingsAutomatic Configuration Event Message Settings Mail SettingsBandwidth Control Mail ServersCOM-Ports System Log Message SettingsMail Reply Settings Communication Settings Modem SettingsUsing a Pan/TIlt/Zoom device Date & Time ISP SettingsCurrent Network DVR Time New Network DVR TimeSystem Options Axis 2460 User’s Manual Adding Users UsersDeleting Users Firewall SettingsChanging the properties for existing Users Adding Allowed IP AddressesMaintenance Advanced MaintenanceSupport Axis 2460 User’s Manual Factory Default Settings Factory Default SettingsRecording Storage and Reduction Axis 2460 User’s Manual Selecting the Recording ModeAppendix a Recording Storage and Reduction Mode NormalPriority Approximate Storage TimesStatus LED Indicators Axis 2460 User’s Manual Appendix B The LED IndicatorsAxis 2460 User’s Manual Troubleshooting Appendix C TroubleshootingChecking the Firmware Pinging Your IP AddressTroubleshooting Axis 2460 User’s Manual Symptoms, Possible Causes and Remedial ActionsFaulty configuration Other IP Setup Methods Axis 2460 User’s Manual Appendix D Other IP Setup MethodsInstalling the Axis IP Installer Using the Axis IP InstallerSetting the IP Address with Axis IP Installer Axis 2460 User’s Manual Other IP Setup MethodsOther IP Setup Methods Axis 2460 User’s Manual Appendix E Updating the Firmware Obtaining Updated Firmware Updating the FirmwareChecking the Firmware Version Axis 2460 User’s Manual Updating the FirmwareInstalling Hard Disks Axis 2460 User’s Manual Appendix F Installing Hard DisksAxis 2460 User’s Manual Installing Hard Disks RS-232 Serial Connectors Appendix G Unit ConnectorsUnit Connectors Axis 2460 User’s Manual Pinout InformationAxis 2460 User’s Manual Unit Connectors I/O Terminal Block ConnectorConnector Pinout Relay Output Controlling and MonitoringDigital Inputs Querying the Status of Digital InputsBNC Video Inputs Ethernet Network ConnectorBNC Video Outputs About RS-485Supply Schematic Diagram With Possible ApplicationsAxis 2460 User’s Manual Technical Specifications Appendix H Technical SpecificationsTechnical Specifications Axis 2460 User’s Manual Index Index

2460 specifications

Axisoft Tech 2460 is a cutting-edge technological solution designed to meet the dynamic demands of modern industries. This innovative platform marries advanced software capabilities with robust hardware specifications. At its core, the Axisoft Tech 2460 is engineered to enhance productivity, streamline processes, and provide an intuitive user experience, making it an integral tool for businesses aiming to leverage technology for competitive advantage.

One of the standout features of the Axisoft Tech 2460 is its high-performance processing unit. Equipped with a powerful multi-core processor, the device ensures efficient multitasking and rapid data handling. This allows users to execute complex tasks without delays, resulting in improved workflows and enhanced overall efficiency. The system’s architecture is designed to support scalability, making it ideal for both small enterprises and large corporations.

In terms of connectivity, the Axisoft Tech 2460 supports a variety of protocols, including Wi-Fi, Bluetooth, and Ethernet, ensuring seamless integration with existing systems. This versatility allows businesses to adopt the platform without overhauling their current infrastructure, minimizing disruption and maximizing return on investment. Additionally, its cloud connectivity features enable remote access and collaborative capabilities, facilitating real-time communication among teams, regardless of location.

Security is a paramount concern for businesses today, and the Axisoft Tech 2460 addresses this with state-of-the-art encryption technologies and user authentication mechanisms. These security features protect sensitive data and ensure compliance with industry regulations, providing peace of mind for organizations.

The user interface of the Axisoft Tech 2460 is intuitively designed, promoting ease of use. Its customizable dashboards enable users to tailor their experience to their specific needs, representing data and analytics in a manner that is both accessible and informative. The system also boasts compatibility with various applications, which furthers its functionality and adaptability.

In summary, Axisoft Tech 2460 stands out for its exemplary performance, connectivity options, security features, and user-friendly interface. By leveraging advanced technologies, it empowers organizations to innovate and remain competitive in an ever-evolving marketplace. Whether enhancing operational efficiency or facilitating collaboration, the Axisoft Tech 2460 proves itself as a valuable asset for any forward-thinking enterprise.