Bosch Appliances DVR1EP32A, DVR1EP16, DVR1EP08 Main Menu Archive Setup Restore From Archive

When all required search criteria has been entered, highlight [START SEARCH], then press ENTER. The Archive Search Results window will appear.

ARCHIVE SEARCH RESULTS

	START DATE	START TIME	SIZE (MB)
000	11/28/00	17:52:14	26842	[ ]
001	11/29/00	9:35:20	2062	[ ]
002	11/29/00	10:00:04	278 [X]
003	11/29/00	10:03:25	66 [X]

	SELECTED [	383 ](MB)
AVAILABLE ON TARGET MEDIUM [		652 ](MB)
"ENTER" TO PLAY	"SEARCH" TO ARCHIVE

Use the Left/Right Arrows to navigate the Search Results menu, highlighting the recorded event you wish to select. Use the Up/Down Arrows to select a recorded event by placing [X] in the check box.

ARCHIVING...

[CANCEL]

To begin archiving the selected event(s), press SEARCH. The Archiving progress bar will appear. Press ENTER to cancel archiving at any time.

When the unit has finished archiving, the Archiving Completed message will appear. Press ENTER to acknowledge the message and complete the archiving process.

Main Menu ➝ Archive Setup ➝ Restore From Archive

MESSAGE

ARCHIVING COMPLETED

[OK]

This menu is used to either play back archived video from a disk array archive, or restore the video to the DVR1’s hard drive.

NOTE: If video was archived on a CD-ROM, you must play back video from a PC using the Remote Viewer software (no audio capabilities are present in this archive format).

The Restore Search Filters menu functions similar to the Archive Search Filters menu (as described previously). When the search completes, a Restore Search Results menu appears.

RESTORE SEARCH FILTERS

	START								STOP
DATE: 12/25/00							[ ]	01/01/01		[ ]
(MM/DD/YY)								(MM/DD/YY)
	START								STOP
TIME: 11:11:21							[ ]	12:34:34		[ ]
1	2	3	4	5	6	7	8
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
			[CANCEL]
								[START SEARCH]

Main Menu ➝ Archive Setup ➝ Background Archive

This archive feature enables automatic and continuous archiving in the background while other system operations continue (i.e., all information going to the DVR1 hard drive is continuously sent to the DVAA Series Disk Array). If this mode is enabled, the archive device must provide the required data transfer and storage capacity.

NOTE: Background Archiving should never be used with CD-writer archive devices or with the unit recording at the 60 ips recording rate.

Main Menu ➝ Archive Setup ➝ Archive Overwrite Mode

This setting determines what happens when the archive device is full. The three options are: Write once, No overwrite, and Continuous.

18