SVAT Electronics CLEARVU10 instruction manual Multi-Screens, Customize the MULTI- Screen Display

SVAT ELECTRONICS

now you can see

MULTI-SCREENS

The CLEARVU10 gives you several different viewing options for your cameras. You can choose between Sequence Mode, Single camera, Quad (4 camera), 6 camera, 8 camera, and 8 Camera (Grid).

TO CHANGE YOUR CAMERA DISPLAY

1.To change your camera display, click the right mouse button on the Live Display screen.

2.Click the DISPLAY icon.

3.The Sequence Symbol is displayed and Sequence mode will be activated. In sequence mode, the DVR will show each camera in full screen for 3 seconds (default time) before switching to the next channel. This sequence will repeat until a different display mode is chosen. To change the default display time, see MAKING CHANGES TO THE MONITOR MENU, pg.28.

4.To choose a different Display mode, repeat steps 1 and 2. This time, Single Display mode will be activated.

5.If you do not wish to view in Single Display mode, repeat steps 1 and 2 to view a different display option.

6.Continue repeating steps 1 and 2 until you find a preferred layout.

TIP: To view an individual camera in full screen at any time, simply double click the camera you wish to view. To exit and return back to your previous viewing mode, double click the screen again.

CUSTOMIZE THE MULTI- SCREEN DISPLAY

Once you have chosen a preferred display mode, you can change the placement of cameras on the screen. Changing camera positions is achieved in a “remove and replace” method. For example, If you want Camera 6 to be displayed in Camera 1’s frame, you have to Remove Camera 1 from the display and then set Camera 6 to display in its place. You can then set Camera 1 to display in a different frame.

TIP: You can also access the Display menu by clicking the “Display” button on the DVR’s button panel.

CLEARVU10 19