SVAT Electronics CLEARVU10 instruction manual Making Changes to the Alarm Input Menu

Page 57

SVAT ELECTRONICS

now you can see

SMART ALARM: Can be turned ON or OFF. This feature sets the DVR to monitor the hard drive to detect any problems or errors that might be developing. If the DVR detects an error, it will sound an alarm.

CHECK INTERVAL: Allows you to set a daily schedule for the DVR to enable Smart Disk monitoring. If the SMART ALARM (above) is set to ON, the DVR will scan for errors at the time period indicated. If any are detected, it will generate an alarm.

MAKING CHANGES TO THE ALARM INPUT MENU

1.After saving any desired changes to other menus. Click the ALARM IN title on the left hand side of the window.

2.You will see a window open with 8 alarms listed. You will also see the column for OPERATION, and a column for TYPE.

3.The OPERATION column allows you to enable or disable up to 8 alarms. Use

the buttons to enable or disable each alarm.

4.The TYPE column allows you to set whether each alarm is N/O (Normally Open) or N/C (Normally Closed). Use N/O in a situation (for example) where a door is continuously open. An alarm will occur when the door is closed. N/C should be used in a situation (for example) where a door is to remain closed. If the door is opened, an alarm will sound.

NOTE: The ALARM IN and ALARM OUT menus configure settings for an external alarm device (for example, a motion sensor) or an independent alarm which will sound when an event is detected. The setup and activation processes of these devices will very from model to model, so please refer to your sensor or alarm’s instruction manual for proper setup.

5.When you have made all the desired changes to the ALARM IN menu, click APPLY. If you wish to exit without saving changes, click in the top right corner of the window.

MAKING CHANGES TO THE ALARM OUT MENU

1.After saving any desired changes to other menus, click the ALARM OUT title on the left hand side of the window.

2.You will see a screen pop up with the 8 channels listed. You will see the choice to have the alarm triggered by video loss or motion.

CLEARVU10	57

Image 57

Contents 8CH All-In-One 19 LCD-DVR Need Svat Canada Svat USA Product Warranty InformationTable of Contents Recording Modes Playback Mode Archive Menu 106 Introduction Record up to 240 Days What is Included FeaturesOptional Accessories CV67KIT 4 Camera Expansion PackCVw62 60 ft. camera extension cable Buttons & Connections LCD DVRCCD Color Camera Camera Installation Things to Consider Before InstallationWiring MountingConnecting Additional Devices to the DVR Connecting USB DevicesConnecting a USB Mouse for Onscreen Navigation Connecting Audio Equipped Cameras not Included Connecting Additional Monitoring DevicesConnecting 6 PIN DIN Cameras not Included Archiving Recorded FootageNow you can see Connecting AN Additional Monitor not IncludedUsing the Remote Control for Onscreen Navigation Connecting and Powering on Live Display To Power OFF the DVR Recording StopsShutting Down To Turn OFF the LCD Screen Recording ContinuesCustomize the MULTI- Screen Display MULTI-SCREENSTitle Menu , pg.35 Digital Zoom ModeKEY Lock Function Using Zoom ModeRecording Modes To Play Back Footage Playback ModeAdvanced Search Accessing the Search MenuSearching by Time Click the Search iconSearching by Event When you reach the desired time, press PlayGeneral Menu Main MenuDisplay Menu Use the buttons to choose the preferred settingMaking Changes to the OSD Onscreen Display Menu Click the OSD title on the left hand side of the windowMaking Changes to the Monitor Menu Making Changes to the Sequence Menu Button allows you to move When you have finished making sequenceBetween capital letters and lowercase, Can be used to delete lettersNow you can see Setting UP a SPOT-OUT TV/MONITOR not Included Making Changes to the SPOT-OUT Menu When you are satisfied with your settings, click ApplyCamera Menu General menu, click the Camera button Making Changes to the Camera Title MenuMaking Changes to the Color Setup Menu When you have finished making sequence Title, clickChanging the Camera Title Setting UP the PTZ Camera Making Changes to the PTZ Setup MenuConfiguring the PTZ Menu Options Click the Setup iconClick the Camera button Controlling the PTZ Camera Through the DVR Making Changes to the Motion Sensor Menu Adjusting Area Setup Now you can see Making Changes to the Audio Menu Sound MenuMaking Changes to the Buzzer Menu To turn the remote control beep off, clickMaking Changes to the DATE/TIME Menu System MenuClick the System button Changes, click in the top right corner of the windowMaking Changes to the Network Menu DATE/TIMEnow you can seeMaking Changes to the User Management Menu Making Changes to the Mail MenuUse the buttons to turn e-mail notifications on or OFF Adding a NEW UserEditing Existing Users Now you can see When you have completed entering your password, press OK Deleting UsersUse the buttons to select your User ID Changing the System Name Updating the System Management MenuUpdating the SYSTEM’S Firmware Press Start Press OK when promptedAfter restarting, the new changes will take effect Saving the System Data Loading System DataMaking Changes to the Control Device Menu EVENT/SENSOR Menu Making Changes to the HDD Event MenuClick the EVENT/SENSOR button Making Changes to the Alarm Input Menu Making Changes to the Alarm OUT MenuButtons to enable or disable each alarm Making Changes to the Buzzer OUT Menu Making Changes to the Email Notification Menu Making Changes to the Disk Manage Menu Disk Manage MenuClick the Start button next to Format Formatting the DVR’S Hard DriveNow you can see Click the Record button Record MenuMaking Changes to the Recording Operations Menu Making Changes to the TIMER/MOTION Setup Menu Making Changes to the SIZE/FPS/QUALITY/AUDIO SettingsIf you have chosen Weekly under Now you can see Making Changes to the Activation Menu Now you can see Making Changes to the Alarm Setup Menu Archiving Video Footage to AN External USB Device Archive MenuUse the arrows to select the date and time DVR Networking Guide Preparing Your DVROnce extracted, the footage is copied to CD or USB Accessing the DVR’S IP Information Connecting the DVR to Your RouterNET Client Port example WEB Server Port example Configuring SettingsPreparing Your Computer Installing the Remote Viewer Software on Your PC Understanding the Remote DVR Viewer Software Its camera is displayed on screen Controls the alarm outputsButton will be grey Only one channel can be listened to at a timeCreating a Connection Group Getting StartedEntering the DVR’S Information Adjusting Your Display on ScreenNew group is now created DVR section you will see 16 drop down buttons with ‘x’Additional Configuration Additional Group SettingsClick ADD to save the DVR’s settings Local setup window, click the Configuration tabSetting UP & Connecting to the Internet Connecting VIA a D-LINK Router Example Under Schedule, select AlwaysPort forwarding is now complete Testing Your External IP Finding Your External IPPress Enter If YOU Cannot Connect If SuccessfulRemote Viewing Software should pop up Menu and click to connect to your DVRFinding and Testing MY External IP Troubleshooting Checklist Networking RequirementsPreparing the DVR Networking InformationForwarding Outside Your Network Setting UP a Dynamic DNS AccountNow you can see Finalizing Setup Configuring the DVR’S Ddns Information Click Apply and allow the DVR to restart Setting UP Your DVR to Send Email AlertsUnderstanding the Notification E-MAILS Sending a Test EmailEntering Setup Configuring Mail SettingsMaking Changes to the Record Menu Making Changes to the Camera Menu Making Changes to the Sound Menu Making Changes to the EVENT/SENSOR Menu Making Changes to the System Menu Referring to the Event Viewer for Events and Activity 100 101 Playing Back Previous Footage Finding Previously Recorded FootageArchiving Footage to Your PC FootageArchiving screen will pop up Saving Still Shots Screen Caps to Your PCSearching the LOG Viewer for Events Sending a Still Image to Your PrinterSearch Log will pop up Press to play the video associated with the event105 Troubleshooting Guide Accessing the DVR at a later time Information on adjusting color settings, refer to pg.36Frame Message But nothing is recordedCheck all your network connections Internet Connection Verify batteries are installed correctlyAs you complete it PortGanz ZC-PT FPS Fully AdjustableCBCGanz Win4net WSD 7425D SaeiloOutdoor Camera CV67 Hi-Res Security Camera What is Included Installation Make sure your camera is not aimed at direct sunlight Identify this channelAmbient light available Backwards to let in more lightDrilling Template 116 117 118 Page Visit US on the WEB