SVAT Electronics CLEARVU10 instruction manual Saving the System Data, Loading System Data

SAVING THE SYSTEM DATA

1.Insert your USB drive into the USB port on the side of the DVR.

2.Press the SAVE button next to SYSTEM DATA.

3.A Window that says “Success” will pop up when the settings have completed transferring.

SVAT ELECTRONICS

now you can see

LOADING SYSTEM DATA

1.Insert your USB drive into the USB port on the side of the DVR.

2.Press the LOAD button next to SYSTEM DATA.

3.A Window that says “Success” will pop up when the settings have completed transferring.

MAKING CHANGES TO THE CONTROL DEVICE MENU

NOTE: This menu is used to set up an external remote control (not included) to control multiple devices with a singular remote.

1.After saving any desired changes to other menus, click the CONTROL DEVICE title on the left hand side of the window.

2.To navigate through the CONTROL DEVICE menu,

use the mouse to click the buttons to choose the preferred setting.

3.When you have made all the desired changes to the CONTROL DEVICE menu, click APPLY. If you wish to exit without saving changes, click in the top right corner of the window.

4. After clicking APPLY, click in the top right corner of the window to exit the DISPLAY menu and return to the GENERAL menu screen.

CLEARVU10 55