10Exit, Info Menu, All Record | SVAT Electronics CVDVR900 specification

OPERATION INSTRUCTION continued

A-10Exit:

Highlight and select Exit, then press [Enter] to confirm for save the change of setting then return back to main menu.

B. Info Menu

While system is in use, select [Info Menu] to check the menu content. The info menu can be seen as shown below, highlight the item for selection and then press [Enter]to confirm.

Info Menu

All Record

Alarm Record

Alarm Log

Operate Log

Channel Status

HDD Status

Machine Info

Exit

B-1 All Record:

Highlight and select All Record, then press [Enter]for this selection, the sub-menu will shown (as below), then select the required channel and date, press "Start" to see the record at specific requirement.

Info Menu		Input date and time of all record
All	Record	Channel:	01
Alarm	Record
		Time:	2003/11/28, 23:30
Alarm	Log
		Start
Operate	Log
		Return
Channel	Status

HDD	Status
Machine	Info
Exit

After pressing enter, there will be a sub-menu shown (as below), and the calendar will dis- play dates 1 to 31 as per selected month, move the cursor to select different dates in order to check the record and press [Enter] to view. A yellow font represents recording existance for this.

If no recording exists for certain date, "No exist record" will be displayed. Using page up ("UP") and down ('DO") ("+/-" key) for those more than 1 page recording list.

	Channel 1 2003/11/28 Recording Info
01	02	03	04	05	06
	07	08	09	10	11
12	13	14	15	16	17
	18	19	20	21	22
23	24	25	26	27	28
	29	30	31	UP	DO
CASH 1	08:30-09:00		R	CIF	25
CASH 2	09:30-10:00		M	CIF	25
FRONT	11:30-12:00		A	CIF	25
CASH 1	17:00-18:00		R	CIF	25

	Channel 1 2003/11/2 9 Recording Info
01	02	03	04	05	06
	07	08	09	10	11
12	13	14	15	16	17
	18	19	20	21	22
23	24	25	26	27	28
	29	30	31	UP	DO

NO EXIST RECORD

•Title: Channel name.

•Recording Time: Period for the recording time, the length for each at 60 minutes.

•Recording method: "R" for timer record, "M" for manual record, "A" for alarm record.

•Sharpness: D1, HD1 and CIF to indicate the level of the recording information.

•Frame Rate: While in PAL video system, "25, 12, 06, 03, 01, 0.5" frame rate levels will available. While in NTSC video system, "30, 15, 08, 04, 02, 01" frame rate levels will be available.