INSTALLATION GUIDELINE
A. Installation Environment
In order to ensure the safety with the DVR product and maximize product per- formance, please notice the following while/ before you install the product:
i.Only use with AV220V voltage supply, please check with the power supply with correct voltage before installation. DO NOT USE WITH ANY OTHER ADAPTER (DO NOT PLUG INTO AC380V HIGH VOLTAGE SUPPLY!)
ii.Away from a humid place or exposure with rain.
iii.DVR should be installin in a horizontal position.
iv.Avoid placing the DVR in a location where electric conductivity is high.
v.Avoid exposure to direct sunlight for prolinged periods and do not store in areas with extreme temperature conditions.
vi.For the heat transfer and ventilation purposes, locate the DVR at least 15cm from another object (such as awall) while installing the device.
vii.Avoid placing the DVR near any chemical product. Accidental contact may harm the device.
viii.Avoid placing the device in areas that are dusty and unkept. Dust may damage the unit.
ix.Use correct grounding for the DVR device while operating.
B. Other notices
i.Do not operate the device with wet hands.
ii.Keep away from any wet place, fire hazard can occur by short circuit damage by any liquid dropped to device.
iii.Do not place anything on the top of device;
iv.Use a clean cloth to clean the device. Do not use chemicals to clean the device.
v.Live voltage does exist while the device is connected to a power supply, even when the device is not turned on.
vi.Disconnect the DVR when not in use for an extended period.
This device had been certified with the international safety standard.