DVR User’s Manual
3.4.3Network Time Protocol Setup
Time Zone
Select <Time Zone> to enter the time zone. To find out your local time zone, please visit www.greenwichmeantime.com or refer to the following figure.
NOTE: The <Time Zone> must be set to your local time zone or the <Network Time Protocol Setup> will not be accessible.
Network Time Protocol Setup
After entering the time zone, the <Network Time Protocol Setup> option will appear. Select the <Network Time Protocol Setup> to set the time server. The default time server is time.nist.gov, but the user can change it to other time servers when desired. A list of IP addresses of the time servers is listed below.
129.6.15.28 | 129.6.15.29 | 132.163.4.101 |
|
|
|
132.163.4.102 | 132.163.4.103 | 128.138.140.44 |
|
|
|
192.43.244.18 | 131.107.1.10 | 69.25.96.13 |
|
|
|
206.246.118.250 | 208.184.49.9 | 64.125.78.85 |
|
|
|
207.200.81.113 | 64.236.96.53 | 68.216.79.113 |
|
|
|
After the time server is set, select <Manually Time Sync> to sync the time. The time sync can also be updated periodically. Select <Automatically Time Sync>, and the time will be automatically synced once an hour.
18