DVR User’s Manual
3.5.4To Record Event Video Only
If you want your DVR unit to start recording only when the alarm is triggered, follow the steps:
•Enter the OSD setup menu with correct password.
•In the OSD setup menu, select <Record Setup> menu. Move the cursor to the item <Preset Config>, and select <Event only>.
Refer to OSD Menu Setup Guide, Section Preset Record Configuration for more detailed information.
3.5.5Data Lifetime
Data Lifetime indicates the duration that a video is saved and recallable in the HDD. Only those video recorded within Data Lifetime can be displayed on the screen and played back. The video exceeded Data Lifetime will be hidden and cannot be retrieved for playback.
Press ENTER to select this item in Record Setup menu, and then use UP / DOWN keys to set the data lifetime. The value ranges from <1> to <365> days, or select <0> to disable the function.
NOTE: If you want to play back a video, which is beyond the data lifetime, please extend the duration till the recording data/ time of the video is included.
21