DVR User’s Manual
4.5.5Setting Preset Points
The DVR series unit allows user to set preset positions. The amount of preset points depends on the dome manufacturer.
Follow the steps to set preset points.
•Press a Channel key to view the corresponding camera in full screen.
•Then press DOME to enter dome control mode. And a Hint Screen shown as below figure displays on the screen.
•Press 2 to hide the dome control Hint Screen; press 2 again to toggle the Hint Screen.
•Use Direction keys to position the dome camera to desired position.
Hint Screen
DOME / ESC: Exit
MODE / PLAY: Iris Open / Close
SEQ / FREEZE: Focus Near / Far
MENU / SEARCH: Zoom In / Out
ENTER: Auto Focus / Iris
◄▲▼►: Pan / Tilt
CH1: Set / Go Preset
CH2: Hint Screen On / Off
Dome Control
•Press 1 to access the Set/Go Preset function. The Dome Preset menu is displayed.
| Dome Preset |
|
Index | Set Preset | Go Preset |
1 | NO | NO |
2 | NO | NO |
3 | NO | NO |
4 | NO | NO |
5 | NO | NO |
6 | NO | NO |
7 | NO | NO |
•Use UP / DOWN keys to select the desired preset number from the menu.
•Set the <Set Preset> of the selected preset number to <YES>, and press ENTER to save the position. Now the preset is set and ready to be called.
36