Proficient Audio Systems 00P3DG090DSEB3 user manual Searching Recorded Video

DVR User’s Manual

4.2.2Sequence with Call Monitor (8ch and 16ch only)

Users are allowed to use the DVR series unit front panel to control a call monitor display without having to access the Main menu. Two viewing modes can be displayed on call monitor: Sequence display and Single camera display. To program the call monitor sequence, see OSD Menu Setup Guide, Section Sequence Setup.

Follow the steps to control the call monitor.

•Press the CALL key on the front panel to enter call monitor control mode. The message “Call Mode” will be shown on the bottom-left of the screen.

Press 1-16 Key To Select Channel

Press SEQ To Enable Sequence

Call Mode

•Press CHANNEL key to display the associated camera on call monitor.

•Alternatively, press SEQ repeatedly to display the sequence of cameras previously programmed in Call Monitor Schedule menu.

•Press ESC to return the front panel to Main monitor control mode.

4.3Searching Recorded Video

The DVR series is capable of searching and playing back recorded video by date and time or events. Entering the specific date and time of the wanted video, the unit will then search for the matched video and play it on the monitor. Alternatively, the user can search event video by selecting channel as well.

In live or playback mode, press SEARCH to enter the Search menu, which is shown as follows.

	Search
----------------------------Search By Time----------------------------
From:	2005/01/01	00:00:00
End:	2005/05/01	00:00:00
Select:	2005/01/01	00:00:00
----------------------------Search By Event		Begin Playback
Select Channel:	CH1 CH2 CH3 CH4
		Event List

28