C O M M E R C I A L P R O D U C T S D I V I S I O N
Press Enter once again and the Error Log appears. Press the ▼ or ▲ key to view the error messages. To return to the Precor banner, press Enter or Reset.
Note: To clear (delete) the error log, press Quick Start for at least 4 seconds while viewing the list. Prompts appear on the display and let you know when the error messages have been deleted (“cleared” from memory).
Important: You cannot retrieve the error log once you have deleted it.
USING CSAFE STANDARD EQUIPMENT
The EFX556 is fully compatible with CSAFE protocols. If the unit is connected to a CSAFE master device, the user will be prompted to enter a user ID. Five zeros appear on the display. The left zero blinks to indicate that it is awaiting input. The following table provides information about the keypad functions:
User ID Entry: Program Keys
▼or ▲
Number keypad
Enter
Reset
moves the blinking LED from field to field.
use the number keys to enter a user ID. The number that is pressed appears in the display and the next field begins to blink. When all 5 user ID numbers are selected, the user must press Enter to submit it.
submits the displayed user ID. Note that if the 5 zeros are being displayed when the user presses Enter, the user ID entry is bypassed and the Course prompt appears.
resets the display to the Precor banner.
A message indicates when the user ID is accepted by the CSAFE master device. Then, the Course prompt is displayed. See Quick Steps to Working Out on page 28.
page 19
