Maxtor 16Channel Stand Alone DVR manual Display Setup, Screen Display, Monitor Setup

CHAP. 5 Set Up

5-2. DISPLAY SETUP

Setting up parameters for monitor and display on screen.

Enter into SYSTEM MENU-DISPLAY SETUP.

DISPLAY SETUP

SCREEN DISPLAY

MONITOR SETUP

LIVE

PLAYBACK

VGA SETUP COLOR BAR TEST

SELECT MENU : ▲▼, & [ENTER]

1) SCREEN DISPLAY

1	2
3	4
	5

Setting up the screen display in LIVE mode and PLAYBACK mode.

Select the sub-menu which you would like to set using direction buttons and then change ON/OFF with [ENTER] button.

1.TIME/DATE : Display time & date

2.DVR STATUS : Display system setting status

3.ICON DISPLAY : Display function setting status

4.REC/PLAY BAR : Display record / playback status

5.CAMERA TITLE : Display camera title

2)MONITOR SETUP

VGA SETUP : VGA option card enables to connect TFT LCD monitor or CRT type PC monitor to DVR unit. To connect TFT LCD monitor or CRT type PC monitor to DVR unit, select resolution as follows using [+] or [−] button. After setting the below option, press [ENTER] button then the DVR unit will set VGA resolution automatically.

VGA option card supports following resolution, and choose best resolution that match TFT LCD monitor or CRT type PC monitor to be connected to DVR unit.

- 640X480 / 60Hz	- 640X480 / 75Hz	※ NOTICE : In the booting process,
- 800X600 / 60Hz	- 800X600 / 75Hz	DVR unit with VGA option
- 1024X768 / 60Hz	- 1024X768 / 75Hz	card takes some seconds
- 1280X1024 / 60Hz	- 1280X1024 / 75Hz	more to set parameters.

COLOR BAR TEST : Adjust color tone of monitor.

(Color bar test is Not available for monitor through VGA)

20