Maxtor 16Channel Stand Alone DVR manual Start Writing in USB Storage Finish Writing in USB Storage

SIZE , FREE SPACE, PARTITION

CHAP. 5 Set Up

Partition can be selectable by Ch button 1~4.

USB SETUP

HDD

[START] 2005/AUG/07 AM04:04:12

[END ] 2005/AUG/08 PM08:12:23

USB MEDIA

[START] 2005/AUG/07 AM04:04:12

[END ] 2005/AUG/08 PM08:12:23

[SIZE ] 00000MB

Status message BACKUP

USB STORAGE IS CHECKING…

EXIT : [MENU]

USB SETUP

HDD

[START] 2005/AUG/07 AM04:04:12 [ END ] 2005/AUG/08 PM08:12:23

USB MEDIA	118M , 28M , P:1
[START]
	2005/AUG/07 AM04:04:12

[END ] 2005/AUG/08 PM08:12:23

[SIZE ] 28 MB - > 28MB

BACKUP

START WRITING IN USB STORAGE

EXIT : [MENU]

System Status Messages

(1) If USB MEMORY STICK is not inserted :

- USB STORAGE IS CHECKING…

-USB STORAGE IS NOT AVAILABLE

-RE-CONNECT THE USB STORAGE

-CONECT THE OTHER USB STORAGE

(2)When USB MEMORY STICK is recognized

- USB STORAGE IS CHECKING …

- THERE IS A FREE SPACE ON STORAGE - USB STORAGE IS AVAILABLE

(3)During Back-Up

-CHANGE WRITE PROTECT MODE (Only WRITE PROTECT is caught, it can be seen)

-START WRITING IN USB STORAGE

-FINISH WRITING IN USB STORAGE

(4) Error Message

-THERE IS A PROBLEM ON USB PORT (If USB PORT fails to work properly)

-USB STORAGE IS FULL (When USB is full)

-FILE SYSTEM IS NOT SUPPORTED (If File System is not supported)

-SIZE IS LARGER THAN FREE SIZE (If back-up size is larger than free space)

※Back-Up procedure is the same as CDR Back-Up.

※If Back-Up size is larger than 2GB, it creates several files. (It saves by 2GB).

5-6. EXTERNAL DEVICE

Set parameters of external devices connected to DVR, like Ethernet, PTZ camera, RS-232C, etc. Use direction button to move to sub-menu and Press [ENTER] button to set.

1) TCP/IP SETUP

TCP/IP function enables user to see live pictures and recorded pictures via the internet.

(1) IP CONFIG SETUP :

Show the network information assigned to the DVR unit. If the DHCP setup status is AUTOMATIC, user can set the IP port only and if the DHCP setup status is MANUAL, user must set all parameters.

For detail procedure of Remote viewer program installation, refer to CHAP. 6 Software program.(Remote viewer software).

IP CONFIG SETUP

MAC ADDRESS	_ _ _ _ _ _ _ _ _ _ _
	00-0A-A2-00-00-00
IP ADDRESS	_ _ _ _ _ _ _ _ _ _ _
	192.168.001.160
IP PORT	_ _ _ _ _ _ _ _ _ _ _
	50000
GATEWAY	_ _ _ _ _ _ _ _ _ _ _
	192.168.001.001
SUBNET MASK	_ _ _ _ _ _ _ _ _ _ _
	255.255.255.000
DHCP SETUP
	AUTOMATIC

SELECT MENU : ▲▼, & [ENTER]

30