Maxtor 16Channel Stand Alone DVR manual Vga, Ethernet, Monitor, Spot, Power, Switch

CHAP. 2 Function of Each Button

2-2. REAR

	Name	Function
1	RS 485	Connection with PTZ Camera or other external device using RS 485
		interface
	RELAY Output	Relay out terminal
	SENSOR Input	Sensor input terminal
2	VGA	Connection to VGA Monitor (CRT type or TFT LCD monitor)
		Just in case you purchased DVR with VGA option board fixed on the main
		board of DVR, you can connect VGA Monitor to DVR unit.
3	ETHERNET	Connection to ETHERNET device
4	RS-232C	Connection to external device as PC using RS-232C to control the DVR
5	CAMERA Input	Connection with camera
6	LOOP Output	Camera loop out
7	MONITOR	Connection with Composite Monitor
	Output
8	SPOT	Connection with additional composite monitor
9	DC Power	DC 12V 6.67A Adaptor
10	POWER	Power ON/OFF switch for adapters
	SWITCH	To avoid accidental deletion of HDD data, please make sure to press
		MENU button and enter into setup menu before powering off the unit.
		This takes the unit out of record mode for safe shutdown.
11	Audio Input	Microphone Input (4ch)
	Audio Output	Speaker Output (1ch)

8