CHAP. 5 Set Up
4) SPOT MONITOR SETUP
SPOT MONITOR SETUP |
|
|
|
|
|
SWITCH INTERVAL | 03 SEC |
ALARM POP UP | ON |
MOTION POP UP | ON |
EVENT POP UP DURATION | 01 SEC |
|
|
SELECT: ▲▼, CHANGE VALUE : + -
※EVENT POP-UP DURATION
Set EVENT
(1) SWITCHING INTERVAL
Channel switching time (01 sec. ~ 99 sec.)
(2) ALARM POP-UP
When ALARM is detected, the image of channel connected with Alarm sensor pops up.
Set ALARM detection
(3) MOTION POP-UP
Set MOTION detection
If events (MOTION or ALARM) happen on several channel at the same time, channel No. 1 has the first priority to pop up. For example, if events happen on channel No. 1, channel No. 2, and channel No. 4 at the same time, channel No. 1 pops up. If the motion disappears on channel No. 1, then channel No. 2 pops up for the duration that you set. However, even though motion happens on channel No. 1 again within the duration, channel No. 2 still displays. If motion on channel No.1 keeps on going even after the duration, channel No. 1 pops up again.
5) AUDIO SETUP
Use direction button to move to channel and Press [ENTER] button to set (ON/ OFF).
AUDIO SETUP
1) REC
CH | REC | PLAY | (1) ON : Record images with AUDIO | |
| ||||
01 | ON | ON | (2) OFF : Record images without AUDIO | |
| ||||
02 | ON | ON | 2) PLAY | |
03 | ON | ON | ||
| ||||
04 | ON | ON | (1) ON : Recorded sound comes out during | |
|
|
|
playback
(2) OFF : Recorded images only play back
SELECT: ▲▼◀▶, & [ENTER]
33