Philips HTB3525B Control, Option 2 Connect audio through a digital coaxial cable, Enable EasyLink

•The digital optical connector might be labeled SPDIF or SPDIF OUT.

Option 2: Connect audio through a digital coaxial cable

Good quality audio

1 Using a coaxial cable, connect the COAXIAL IN connector on your Blu- ray Surround Base to the COAXIAL/ DIGITAL OUT connector on the TV or other device.

•The digital coaxial connector might be labeled DIGITAL AUDIO OUT.

Option 3: Connect audio through analog audio cables

Basic quality audio

1 Using an analog cable, connect the AUX IN connector on your Blu-ray Surround Base to the AUDIO OUT connectors on the TV or other device.

VCR

Set up EasyLink (HDMI-CEC
control)	gl i s h
	E n
This Blu-ray Surround Base supports

Philips EasyLink, which uses the HDMI-CEC (Consumer Electronics Control) protocol. EasyLink-compliant devices that are connected through HDMI can be controlled by a single remote control.

Note

•• Depending on the manufacturer, HDMI-CEC is known by many names. For information on your device, see the user manual of the device.

•• Philips does not guarantee 100% interoperability with all HDMI-CEC devices.

Before you start

•Connect your Blu-ray Surround Base to the HDMI-CEC compliant device through HDMI connection.

•Make the necessary connections described in the quick start guide, and then switch the TV to the correct source for your Blu- ray Surround Base .

Enable EasyLink

1 Press .

2 Select [Setup], and then press OK.

3 Select [EasyLink] > [EasyLink] > [On] .

4 On your TV and other connected devices, turn on HDMI-CEC control. For details, see the user manual of the TV or other devices.

•On your TV, set the audio output to

'Amplifier' (instead of TV speakers).

For details, see the TV user manual.

EN 11