Philips HTB3525B user manual Update software, Speaker settings, Restore default settings

Speaker settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Advanced], and then press OK.

4 Press the Navigation buttons and OK to select and change:

•[Enhanced audio]: Select [On] to enable audio post processing at the speaker and enable karaoke settings (if your product supports Karaoke). To play the original audio of the disc, select [Off].

Tip

•• Enable audio post processing before you select a predefined sound mode (see 'Sound mode' on page 21).

7 Update software

Philips continually tries to improve its products. To get the best features and support, update your Blu-ray Surround Base with the latest software.

Compare the version of your current software with the latest version on www.philips.com/ support. If the current version is lower than the latest version available on the Philips support website, upgrade your Blu-ray Surround Base with the latest software.

Caution

•• Do not install a lower version of software than the current version installed on your product. Philips is not liable for problems caused due to software downgrade.

E n g l i s h

Restore default settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Advanced] > [Restore default settings], and then press OK.

4 Select [OK], and then press OK to confirm.

»»Your Blu-ray Surround Base is reset to its default settings except for some settings such as parental control and DivX VOD registration code.

Check software version

Check the version of the current software

installed on your Blu-ray Surround Base .
1	Press .
2	Select [Setup], and then press OK.
3	Select [Advanced] > [Version

information].

»»The software version is displayed.

Update software through

USB

What you need

•A USB flash drive that is FAT or NTFS- formatted, with at least 256MB of memory. Do not use a USB hard drive.

•A computer with Internet access.

•An archive utility that supports the ZIP file format.

EN 25