
6 Change settings
The
Note
•• You cannot change a setting that is grayed out.
•• To return to the previous menu, press . To exit the menu, press
.
Language settings
1 Press .
2 Select [Setup], and then press OK.
3 Select [Preference], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Menu language]: Select a display language for menu.
•[Audio]: Select an audio language for discs.
•[Subtitle]: Select a subtitle language for discs.
•[Disc menu]: Select a menu language for discs.
Note
•• If your preferred disc language is not available, select [Others] from the list, and enter the
•• If you select a language that is not available on a disc, the
Picture and video settings
1 Press .
2 Select [Setup], and then press OK.
3 Select [Video], and then press OK.
4 Press the Navigation buttons and OK to select and change:
•[Tv type]: If the video does not appear correctly, select a TV type (color system).
•[TV display]: Select a picture format to fit the TV screen.
•[HDMI video]: Select the resolution of video signal that is output from HDMI OUT (ARC) on your
•[HDMI Deep Color]: Recreate the natural world on your TV screen by displaying vivid images using billion colors.Your
•[Picture settings]: Select pre defined color settings for the video display.
•[Watch 3D video]: Set HDMI video to support 3D or 2D video.
•[Closed Caption]:Turn on or off the display of sound effects in subtitles (applicable only when a disc and a TV support this feature).
Note
•• If you change a setting, make sure that the TV supports the new setting.
E n g l i s h
EN 23