Philips HTB3525B user manual Audio settings, Parental control settings, Display settings

Audio settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Audio], and then press OK.

4 Press the Navigation buttons and OK to select and change:

•[Night mode]: For quiet listening, decrease the volume of loud sounds on your Blu-ray Surround Base . Night mode is only available in DVDs and Blu-ray discs with Dolby Digital, Dolby Digital Plus, and Dolby True HD soundtracks.

•[HDMI Audio]: Set an audio format on HDMI output.

•[Default sound settings]: Restore the equalizer settings of all the sound modes to the default values.

Parental control settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to select and change:

•[Change Password]: Set or change your password for parental control access. If you do not have a password or have forgotten your password, enter 0000.

•[Parental control]: Restrict access to discs that are recorded with age ratings.To play all discs, irrespective of the ratings, select 8 or [Off].

Display settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to select and change:

•[Auto subtitle shift]: Enable or disable automatic repositioning of subtitles on TVs that support this feature.

•[Display panel]: Set a brightness level (100%, 70% or 40%) on the display panel of the Blu-ray Surround Base . If you select [Auto off], after 10 seconds of button inactivity, the display will automatically switch off.

•[VCD PBC]: Enable or disable the content menu navigation of VCD and SVCD discs with Play Back Control feature.

Energy saving settings

1 Press .

2 Select [Setup], and then press OK.

3 Select [Preference], and then press OK.

4 Press the Navigation buttons and OK to select and change:

•[Screen saver]: Switch the Blu-ray Surround Base to screen saver mode after 10 minutes of inactivity.

•[Auto standby]: Switch the Blu-ray Surround Base to standby after 30 minutes of inactivity.This timer works only when a disc or USB play is paused or stopped.

•[Sleep timer]: Set the duration of the sleep timer so that the Blu-ray Surround Base is switched to standby after the specified period.

24EN