![](/images/new-backgrounds/1231299/23129963x1.webp)
SET UP for Input Signals
COMPONENT / RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, PB, PR signals “COMPONENT”
R, G, B, HD, VD signals “RGB”
1
Press to display the SET UP menu.
2
3
Press to select the “COMPONENT /
Press to select the desired mode.
COMPONENT
RGB
Press to exit from adjust mode.
SET UP | 1/2 |
SIGNAL |
|
INPUT LABEL | RGB |
PC | |
POWER SAVE | OFF |
STANDBY SAVE | OFF |
POWER MANAGEMENT | OFF |
AUTO POWER OFF | OFF |
OSD LANGUAGE | ENGLISH (US) |
Note:
Selection may not be possible, depending on which optional board is installed.
3D Y/C FILTER – For NTSC AV images
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)
1 | Press to select the “3D Y/C FILTER (NTSC)”. |
|
Press to set ON / OFF.
2
Press to exit from adjust mode.
Note:
When ON, this setting only affects NTSC input signals.
SET UP | 1/2 |
SIGNAL |
|
INPUT LABEL | RGB |
PC | |
POWER SAVE | OFF |
STANDBY SAVE | OFF |
POWER MANAGEMENT | OFF |
AUTO POWER OFF | OFF |
OSD LANGUAGE | ENGLISH (US) |
Press ACTION (
) button
SIGNAL | [ VIDEO ] |
3D Y/C FILTER (NTSC) | ON |
COLOR SYSTEM | AUTO |
3 : 2 PULLDOWN | OFF |
Panasonic AUTO (4 : 3) | NORMAL |
VIDEO NR | OFF |
32