Philips TH-37PR10U Sync, Refresh Rate, FREQ. kHz / V-FREQ. Hz, Setting RGB sync signal

Page 34

SET UP for Input Signals

SYNC

Select SIGNAL from the “SET UP” menu during RGB input signal.

1	Press to adjust.

2 Press to exit from adjust mode.

Setting RGB sync signal

Confirm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal).

AUTO:	The H and V sync or synchronized signal are automatically selected.
	If both input, it is selected the H and V sync.
ON G:	Uses a synchronized signal on the Video G signal, which is input from
	the G connector.
VBS:	Uses a synchronized signal of Composite Sync input, which is input
	from the HD connector.

SET UP	1/2
SIGNAL
COMPONENT/RGB-IN SELECT
INPUT LABEL	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)

Press ACTION () button

SIGNAL		[ RGB ]
SYNC		AUTO
3 : 2 PULLDOWN		OFF
VIDEO NR		OFF
H-FREQ.	33.8	kHz
V-FREQ.	60.0	Hz
SYNC		AUTO
SYNC		ON G
SYNC		VBS

REFRESH RATE

This function sets the refresh rate of the display.

This menu is displayed when the input signal is 50 Hz system (50i, 50p, 25p, 24p, 24sF) of vertical scan rate.

100 Hz: Reduce screen flicker.

50 Hz: Enhance the resolution of moving images.

Note:

It is recommended to set to 100 Hz normally.

1

2

Press to select REFRESH RATE.

Press to adjust.

Press to exit from adjust mode.

SIGNAL	[ VIDEO ]	SIGNAL		[ RGB ]
3D Y/C FILTER (NTSC)		SYNC		AUTO
COLOR SYSTEM	AUTO	3 : 2 PULLDOWN		OFF
3 : 2 PULLDOWN	OFF	VIDEO NR		OFF
Panasonic AUTO (4 : 3)	NORMAL	REFRESH RATE		100 Hz
VIDEO NR	OFF	H-FREQ.	33.8	kHz
REFRESH RATE	100 Hz	V-FREQ.	60.0	Hz
		V-FREQ.	60.0	Hz
SIGNAL	[ COMPONENT ]	SIGNAL		[ Digital ]
		SIGNAL		[ Digital ]
3 : 2 PULLDOWN	OFF	3 : 2 PULLDOWN		OFF
VIDEO NR	OFF	3 : 2 PULLDOWN		OFF
VIDEO NR	OFF	VIDEO NR		OFF
REFRESH RATE	100 Hz	VIDEO NR		OFF
REFRESH RATE	100 Hz	REFRESH RATE		100 Hz
		REFRESH RATE		100 Hz
		H-FREQ.	33.8	kHz
		V-FREQ.	60.0	Hz

H-FREQ. (kHz) / V-FREQ. (Hz)

Displays the H (Horizontal) / V (Vertical) frequencies.

This display is valid only for RGB/PC and Digital input signal.

Display range:
Horizontal	15	- 110 kHz
Vertical	48	- 120 Hz

H-FREQ. 33.8 kHz

V-FREQ. 60.0 Hz

34

Image 34

Contents English Español Operating Instructions Manual de instruccionesModel No. Número de modelo Risk of Electric Shock Do not Open Important Safety Instructions Table of Contents Canadian Notice FCC CautionTrademark Credits Safety Precautions When using the Plasma DisplayAC Power Supply Cord MaintenanceSetup If problems occur during useAccessories Supplied AccessoriesCheck that you have the Accessories and items shown Connections AC cord fixingSignal Names for Mini D-sub 15P Connector PC Input Terminals connectionCommunication parameters CommandSerial Terminals connection Basic format for control dataConnecting the AC cord plug to the Plasma Display Power on / OFFConnecting the plug to the Wall Outlet Selecting the On-Screen Menu Language Selecting the input signalInitial selections INPUT1 INPUT2 INPUT3 PCBasic Controls On OFFOFF Timer button Channel AdjustmentVolume Adjustment Digital Zoom see Press to accessOn-Screen Menu Displays Advanced SettingsSound POS. /SIZE Time / Power OFF Time On Time / Power OFFNormal Full During Multi PIP OperationsPicture Explanation Clock Phase Adjusting POS. /SIZEClock Phase RGB/PC in modeMulti PIP Sub screen Main screen Advanced PIPOne screen Advanced PIP Press to exit from Options menu 1366x768@60Hz RGB, DVI, HdmiDynamic Picture AdjustmentsStandard CinemaAdvanced Settings Sound Adjustment MutePosition Digital ZoomDisplay the operation guide Select the magnification required for the enlarged displayPress to set up DAY or Present Time of DAY Present Time SetupPresent Time Setup Button ForwardDisplay the SET UP Timer Screen Press to select SET UP TimerPower on Time / Power OFF Time Screensaver For preventing image retention Mode selectionStart setting Negative / Scroll selectionSetup of Screensaver Time Reduces screen image retentionOFF Dark MID Bright Side BAR AdjustPress to exit from Screensaver Customizing the Input labels Reduces power consumptionAddition sign Selected Input 3D Y/C Filter For Ntsc AV images SET UP for Input SignalsComponent / RGB in Select Component RGBPulldown / Video NR Color System / Panasonic AutoColor System Refresh Rate Setting RGB sync signalSync FREQ. kHz / V-FREQ. HzOptions Adjustments Becomes the same as the Maximum VOL level Off Initial VOL Sets normal volume LevelVolume display can go up to 63 regardless of the settings Off MENU&ENTER OnFunction EnableInitial Power Normal StandbyNormalization State regardless of the slot power setting InstallationRotate Off Does not rotate the image Weekly Command Timer Time Set the time to execute a command program Press to select a command numberPress to select Time / Command Press to set each itemShipping condition Symptoms Check TroubleshootingSymptoms Checks Plasma Display panelPC input signals RGBCommand list of Weekly Command Timer Specifications Limits and Exclusions Limited Warranty Statement Panasonic Canada IncExecutive Office Customer’s RecordPanasonic Professional Display Company Panasonic Canada Inc